490766
39
Zoom out
Zoom in
Previous page
1/88
Next page
TASCAM DR-2d 39
If the input level is still not sufficient even when maximized
with the INPUT LEVEL + key, then set the GAIN item to MID.
If the input level is still not sufficient, then set the GAIN item
to HIGH.
NOTE
Press the
/HOME [ª] key to exit recording standby.
If the INPUT switch is set to LINE, the MIC GAIN setting has
no effect.
When in recording standby or during recording, the
speaker does not output sound even if the SPEAKER switch
is ON. Connect headphones to the LINE OUT/ connector
if you want to adjust the level or record while monitoring
the input. Use the OUTPUT LEVEL (+, -) keys to adjust the
monitoring volume. This does not affect the sound of the
recording.
TIP
In addition to adjusting the INPUT volume, try changing
the distance and angle between the microphone and the
sound source. The angle and distance of the microphone
can also change the character of the recorded sound.
Use the auto gain control and limiter functions to prevent
loud sound sources from distorting when recording. (See
“Setting the input functions” on page 35.)
Recording
Before starting the following operation procedures, input
selection and level adjustment should be completed, and the
Home Screen should be open.
1 Press RECORD key to begin recording standby.
The screen shows the recording file name, the input source,
the recording audio file type and sampling frequency.
Please confirm that these are as desired before starting
recording.
NOTE
If you have set the MONITOR Screens INPUT item to ON so
that you can always monitor the input, a pop-up appears that
allows you to turn overdubbing ON or OFF.
For ordinary recording, select OFF and continue to step 2.
4–Recording
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DR-2D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DR-2D in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info