617894
72
Zoom out
Zoom in
Previous page
1/104
Next page
72 TASCAM DP-32
11 - Various Other Functions
PREFERENCE menu settings
Use the
PREFERENCE
menu to change various
settings to optimize the unit for your use conditions and
requirements, as well as to restore the factory settings.
Follow these steps to open the
PREFERENCE
menu.
1. When the recorder is stopped, press the MENU
button to open the
MENU
screen.
2. Use the JOG/DATA dial or the CURSOR (5/b/g/
t) buttons to select
PREFERENCE
, and then press
the F4 (t) button.
The
PREFERENCE
screen opens.
3. On the
PREFERENCE
screen, use the CURSOR
(5/b) buttons to select a parameter, and then use
the JOG/DATA dial to change its setting.
Menu item Function Reference
Auto Power
Save
Set automatic power
saving
Page 72
Contrast
Adjust display contrast
Page 34
Brightness
Adjust display brightness
Backlight
Adjust display backlight
Foot SW
Right
Set right footswitch pedal
assignment
Page 49
Foot SW
Center
Set center footswitch
pedal assignment
Foot SW
Left
Set left footswitch pedal
assignment
Undo
History
Set length of undo history Page 47
Jump Back
Set jumpback time Page 53
Auto
Monitor
Set automatic monitoring Page 72
Preview
Time
Set preview playback
time
Page 54
Peak Hold
Set peak hold time Page 43
Song Name
Type
Set file name format Page 72
Date/Time
Set date and time Page 33
Initialize
Restore default settings Page 73
Setting automatic power saving
Use the
Auto Power Save
item to set the amount
of time until the unit power turns off after the last user
operation or function completes.
The options and default value are as follows.
Options: OFF, 3 min, 5 min, 10 min, 30 min
(default)
NOTE
The Auto Power Save function is disabled under the following
conditions.
(1) During recording or playback
(2) When the metronome is in use
(3) When the record function is ON
(4) When a signal is output from the STEREO OUT
Setting automatic monitoring
Input monitoring is possible when recording is enabled
and the transport is stopped.
If automatic monitoring is ON, when playback starts,
input sounds are muted, and only playback sounds can be
monitored.
Use the
AUTO MONITOR
item to set this function.
OFF (default):
Input sounds are not muted even when playback starts.
When recording is enabled, input and playback sounds
are mixed.
ON:
When playback starts, input sounds are muted.
When recording is enabled, only playback sounds can
be heard.
Setting the song name format
Use the
Song Name Type
item to set the format used
for song names created by this unit to
WORD
(default) or
DATE
.
WORD: The characters set are used for the
beginning of the song name.
Example (set to "TASCAM"):
"TASCAM0001"
DATE: The date is used for the beginning of
the song name.
Example (created on July 10, 2012):
"201207100001"
ª
Setting the WORD
When the
Song Name Type
on the
PREFERENCE
screen is set to
WORD
, press the F4 [
t
] button to open
the setting screen.
The length of the word is limited to XX single-byte
alphanumeric characters. (See "Editing names" on page
35.)
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-32 in the language / languages: English as an attachment in your email.

The manual is 10,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info