617894
66
Zoom out
Zoom in
Previous page
1/104
Next page
66 TASCAM DP-32
10 - Mixing Down and Mastering Songs
Trk Too Short
appears and the mixdown recording
will not be performed.
•
When in
Mixdown
mode, some playback functions
do not work. If you try to use one of these functions,
In Mixdown Mode
appears.
2. Press the RECORD (0) button.
The mixdown starts and the RECORD (0) button
lights.
Regardless of the recorder's current position, the
mixdown starts from the IN point.
If necessary, adjust the track faders or the Mixer
screen's PAN knobs while mixing down the tracks
to stereo. These adjustments will be reflected in the
master file.
When the recorder reaches the OUT point, recording
automatically stops.
3. If you want to redo the creation of the stereo
master track, press the RECORD (0) button.
A new master file will be created, and the previous
master file will be overwritten.
NOTE
After recording the master file, you can play back the master
file to check it. (See "Checking the master file" in the following
section.)
Exiting Mixdown mode
Press the MIXDOWN/MASTERING button twice to return
to
Multi Track
mode.
Checking the master file
Follow these procedures to listen to a master file after you
have completed recording it.
1. When in
Mixdown
mode, press the MIXDOWN/
MASTERING button.
The recorder switches to
Mastering
mode and the
Mastering
screen opens.
NOTE
•
In Mastering mode,
Mastering
appears in the upper
left of the Home screen.
•
When in
Multi Track
mode, press the MIXDOWN/
MASTERING button to switch to
Mixdown
mode, and
then press the MIXDOWN/MASTERING button again to
switch to
Mastering
mode.
•
You cannot switch to
Mastering
mode if there is no
master file.
2. In this state, press the PLAY (7) button to play
back the master file that you have created.
CAUTION
Confirm that both the
EQ
and
COMP
items are set to
OFF
. If either is set to
ON
, the playback sound of the
master file will be affected by the equalizer and/or
compressor. (See "Using the mastering equalizer" on
page 67 and "Using mastering compression" on page
68.)
3. When in
Mastering
mode, the transport buttons
work as follows.
•
Press the PLAY (7) button to play back the master
file from the current position until its end.
•
Use the REW (m) button and the F FWD (,)
button to rewind and fast-forward in the same way
as in ordinary recorder mode.
•
Press the STOP (8 ) button to stop playback.
•
Track recording is not possible.
•
Repeat playback and location mark functions
cannot be used.
Since the master file playback signal is output from the
STEREO OUT jack, you can record the output to an
external stereo recorder.
If you are not satisfied with this master file, you can
perform a new mixdown.
NOTE
To listen to a master file recorded in a saved song, load the
song, change the recorder to
Mastering
mode, and then
press the PLAY (7) button to start playback.
Ending master file checking
After checking the master file, press the MIXDOWN/
MASTERING button to return to
Multi Track
mode.
Using the mastering tools
This unit has specialized tools for enhancing the sound
of the master file. Use the equalizer, noise shaper,
compressor, and normalize functions to adjust the overall
volume and sound quality.
Switch to
Mastering
mode and use the mastering
tools to enhance the master file.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-32 in the language / languages: English as an attachment in your email.

The manual is 10,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info