617894

Tascam DP-32 Manual

46
Zoom out
Zoom in
Previous page
1/104
Next page
46 TASCAM DP-32
6 - Basic Recording
When you record in Rehearsal mode, the RECORD (0)
button flashes instead of becoming lit.
After finishing your rehearsal, press the REHEARSE button
to cancel Rehearsal mode.
Making the first recording
Before beginning the following recording procedures,
connect a recording source (such as a microphone or
guitar) to an input, assign that input as the recording
source for the track, and prepare your monitoring
equipment.
1. Press the REC button of the track that you want to
record on.
The REC button flashes red and the unit enters
recording standby.
A maximum of eight tracks can be recorded
simultaneously. When the REC buttons of eight
tracks are flashing, the other REC buttons become
inoperative.
2. Set the recording level.
Use the TRIM knobs of INPUTS A to H to adjust the
input level.
When doing this, adjust the levels appropriately by
checking the OL indicators above and to the left of the
TRIM knobs.
At the same time, confirm that the sound heard from
the headphones or monitoring system is not distorted,
and that no effects have been applied to the sound
unintentionally.
NOTE
The level meter of tracks that have input sources assigned
to them show input levels after the application of INPUT
equalizer.
OL indicators light if inputs are too loud.
If an OL indicator stays lit even when you lower the TRIM
knob for that input, lower the input source signal level.
3. Press the REHEARSE button to activate Rehearsal
mode.
In Rehearsal mode,
Rehearsal
appears in the
upper left corner of the Home screen.
4. Press the RECORD (0) button.
Rehearsal starts, the RECORD (0) button flashes, and
the PLAY (7) button lights.
The REC button of tracks set to be recorded keep
flashing because they are not being recorded.
5. After rehearsing your recording, press the STOP (8)
button.
6. Press the REHEARSE button to exit Rehearsal
mode.
Rehearsal
disappears from the upper left corner of
the Home screen.
7. Press the RECORD (0) button.
Recording starts, and the RECORD (0) and PLAY (7)
buttons light.
The REC buttons of the tracks being recorded stop
flashing and stay lit.
8. After finishing your recording, press the STOP (8)
button.
9. If you want to check part of a recording, use the
REW (m) (TO ZERO) button, for example, to move
(locate) to it.
TIP
Use the TO LAST REC function to move to the last recording
position and the TO ZERO function to return to the start of
the song (
00:00:00
). For more information about the
rewind/fast-forward and locate functions, see "Returning to
zero and the last recording position" on page 52.
10. Press the PLAY (7) button to play back the
recorded tracks.
Use the track and STEREO faders to adjust the
playback level.
Use the MONITOR LEVEL knob or the volume control
on your monitoring system to set the final monitoring
volume.
Use the PAN knob on the Mixer screen to set the
stereo position of each track.
NOTE
•
For each track, the PAN knob on the Mixer screen and the
track fader control the recorded track's playback output
signal or the monitoring sound of the input signal. They
do not control the signal being recorded to the track.
•
If you are not satisfied with the recorded sound, repeat the
procedure above from the beginning.
Multitrack recording
You can record new audio to different tracks while playing
back already recorded tracks.
Arming tracks for recording
•
Press the REC buttons of the already recorded tracks to
turn off their REC buttons if they are lit.
•
Press the REC buttons of the tracks on which you want
to record to put them into recording standby (the REC
buttons start flashing).
Adjusting track pan and level settings
Use the track faders and PAN knobs on the Mixer screen
of the already recorded tracks to adjust their levels and
stereo positions that will be used when monitoring their
playback signals while making the new recording.
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-32 in the language / languages: English as an attachment in your email.

The manual is 10,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info