617894
34
Zoom out
Zoom in
Previous page
1/104
Next page
34 TASCAM DP-32
4 – Preparation
Connecting other equipment
This section shows examples of how to connect other
devices to this unit.
Precautions before making connections
•
Turn off (put in standby) this unit and all devices that
you will connect beforehand.
•
Supply power to all the devices from the same line.
When using a power strip, for example, use one with a
cable that has a high electric current capacity in order
to minimize power voltage variations.
Front panel
TASCAM RC-3F Footswitch
(Optional)
Headphones
Rear panel
USB
Computer
AC outlet
DC plug
Drum
machine
Powered speakers or
amplier and speakers
Connect a
guitar/bass
to INPUT H
Connect electronic keyboards
to INPUTS A to H
Connect microphones
to INPUTS A to H
Mini-B USB plug
External eect
External recorder
CAUTION
•
Do not connect a dynamic microphone using an
unbalanced connection when phantom power is on.
Doing so could break it.
•
Do not connect or disconnect a microphone when
phantom power is on. Doing so could cause a loud
noise and damage the equipment.
•
Before turning phantom power on or off, turn down
the output volume using the MONITOR LEVEL knob,
STEREO fader and external monitor monitoring
system. Depending on the microphone, a loud noise
could occur, resulting in harm to equipment and
hearing.
NOTE
•
Before producing any sound, minimize the output
volume using the MONITOR LEVEL knob and external
monitoring system. Loud noise could occur, resulting in
harm to equipment and hearing.
•
Recorder functions cannot be used when the unit is
connected to a computer via USB.
TIP
When connecting an electric-acoustic guitar with a built-in
preamp or an active-type electric guitar, or when using an
effects pedal, for example, between the guitar and this unit,
set the LINE-GUITAR switch on the rear panel to LINE.
Adjusting the display
You can adjust the contrast, brightness and backlight level
of the display.
Follow these procedures to adjust the contrast.
1. When the recorder is stopped, press the MENU
button to open the
MENU
screen.
2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (highlight green)
PREFERENCE
,
and then press the F4 (t) button.
The
PREFERENCE
screen opens.
3. Use the CURSOR (5/b) buttons to select
Contrast
, and then use the JOG/DATA dial to
adjust it.
Contrast
range:
1
25
(default:
5
)
Brightness
range:
1
25
(default:
13
Backlight
range:
1
25
(default:
25
)
4. After making the settings, press the HOME button
to return to the Home screen.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-32 in the language / languages: English as an attachment in your email.

The manual is 10,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info