Manual Tascam DP-32 (page 23 of 104) (English)

617894

Zoom out

Zoom in

1/104

TASCAM DP-32 23

7 MUTE (solo) indicators

These indicators light when a track is muted or soloed.

When the SOLO button is not lit, it indicates the track

is muted. When the SOLO button is lit, it indicates the

track is soloed.

8 REC buttons/indicators

Use these buttons to enable (arm) or disable recording

for each track.

To monitor a track's input sound through headphones

or a monitoring system, press the REC button for the

corresponding track.

When recording is enabled for a track, the REC button

flashes when the recorder is stopped, and lights

during recording. (See "Making the first recording" on

page 46 and "Multitrack recording" on page 46.)

9 SELECT buttons/indicators

When you press one of these buttons, the

corresponding track (1 to 31/32) is selected as the

current channel (its button lights).

The mixer and other functions affect the current

channel.

These buttons are also used for the following

purposes.

•

To assign an input source to a track (See "Assigning

inputs" on page 40.)

•

To assign effects to an input (See "Inserting a guitar

effect" on page 62.)

•

To select tracks in a fader group

0 TRACK faders (1–31/32)

Use these faders to adjust the monitoring level of each

track's playback signal or input signal assigned to the

track. (See "Levels and balance" on page 64.)

q Operation buttons

Use these buttons to activate/deactivate functions or

make settings. (See pages 26-27 for details.)

w FADER GROUP button/indicator

Press to set a fader group.

The button lights when in use. (See "Fader group" on

page 64.)

e STEREO SELECT button/indicator

When the Assign screen is open, you can press to

move the cursor from the

TRACK

display area to the

STEREO BUS

display area, and set the input for the

stereo bus. (See "Assigning inputs to a stereo bus" on

page 41.)

r STEREO fader

Use this fader to adjust the stereo signal level output

from the STEREO OUT jacks and PHONES jack. Use

this fader also to adjust the recording level when

bouncing or mixing down tracks.

t REW (m) (TO ZERO) button

When stopped or playing back, press and hold this

button to rewind. Rewinding is at a fixed 10x speed.

Press briefly to jump to the previous mark.

Press and hold the STOP (8 ) button and press to

locate the beginning of the song (

00:00:00:00

= ZERO point). (See "Returning to zero or the last

recording position" on page 52.)

y F FWD (,) (TO LAST REC) button

When stopped or playing back, press and hold this

button to fast-forward. Fast-forwarding is at a fixed 10x

speed.

Press briefly to jump to the next mark.

Press and hold the STOP (8 ) button and press to

locate the last recording position (LAST REC point). (See

"Returning to zero or the last recording position" on

page 52.)

u STOP (8) button

Use this button to stop playback, recording and fast-

forwarding/rewinding. Press at the same time as you

press the REW (m) (TO ZERO) button or F FWD

(,) (TO LAST REC) button to locate the beginning

of the song (

00:00:00:00

= ZERO point) or the last

recording position (LAST REC point). (See "Returning

to zero or the last recording position" on page 52.)

i PLAY (7) button/indicator

Press to start playback.

During recording, press to stop recording and start

playback (punch out).

During playback or recording, the PLAY (7) button

lights.

o RECORD (0) button/indicator

Press to start recording.

This button lights during recording. During playback,

if you press this button when a track REC button is

flashing, recording to that track will begin (punch in).

(See "Automatic punching in and out" on page 54.)

3 – Names and Functions of Parts

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-32 in the language / languages: English as an attachment in your email.

The manual is 10,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tascam DP-32 Manual

Product: