617894
15
Zoom out
Zoom in
Previous page
1/104
Next page
TASCAM DP-32 15
2 - Quick Guide
If the OL indicator continues to light even when the
TRIM knob is turned down, the guitar signal itself is
too loud. In this case, lower the output level on the
guitar.
OL indicator
When you play the guitar, level meter
1
(TRACK 1)
shows the input level on the display.
When you raise the fader for TRACK 1, the STEREO
fader and the MONITOR LEVEL knob, you will be able
hear the sound of the guitar through the headphones
(or monitoring system), and the
L
and
R
level meters
will move.
NOTE
•
You can use the PAN knob for TRACK 1 on the Mixer screen
to set the stereo position for monitoring.
•
If the REC button for TRACK 1 is not lit, you will not be able
to hear the guitar sound that is being input.
Recording a guitar to TRACK 1
1. Press the RECORD (0) button to start recording
and play the guitar.
The REC button for TRACK 1 stops flashing and lights
steadily when recording.
2. After you finish your performance, press the STOP
(8) button to stop recording.
The recorded file is saved in the folder of the currently
loaded song.
3. Press the REC button for TRACK 1 so the REC button
becomes unlit.
Playing back the recording
1. To return to the beginning of the song (ZERO
point), press and hold the STOP (8) button and
press the REW (m) (TO ZERO) button.
2. Press the PLAY (7) button to play back the
recording on TRACK 1.
3. Use the fader for TRACK 1 and the STEREO fader
to adjust the playback monitoring level. Use
the MONITOR LEVEL knob to adjust the final
monitoring volume.
TIP
Use the PAN knob for TRACK 1 on the Mixer screen to set the
stereo position of the track signal.
Recording a guitar to TRACK 2
Next, you can listen to the rhythm guitar on TRACK 1 as
you play the lead guitar part and record it on TRACK 2.
Follow these procedures to change the recording source
of TRACK 2.
1. Press the ASSIGN button to open the Assign screen.
We want to record the lead guitar sound from INPUT
H to TRACK 2, but INPUT B is assigned to TRACK 2 by
default.
2. Use the CURSOR (5/b/g/t) buttons or press
the SELECT button for TRACK 2 to move the cursor
(frame) on the Assign screen to
TRACK 2
.
Use the JOG/DATA dial or press the SOURCE button
for INPUT H to set the TRACK 2 recording source to
H
.
3. Press the HOME button to return to the Home
screen.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-32 in the language / languages: English as an attachment in your email.

The manual is 10,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info