617894
12
Zoom out
Zoom in
Previous page
1/104
Next page
12 TASCAM DP-32
2 - Quick Guide
CAUTION
•
Do not remove or insert an SD card when the power
is ON. Always turn the power off (put in standby)
before removing or inserting an SD card.
•
When the power is ON, do not disconnect the power
cord or otherwise interrupt the power to the unit.
Doing so will cause all settings made since the last
time you saved to be lost. If the power is interrupted
while an SD card is being accessed, all recorded songs
and data on the card could be damaged beyond
recovery.
•
Before turning the power ON, minimize the
headphones volume and the volume on any
monitoring system connected to this unit.
TIP
By connecting an amplifier or powered speakers to the
MONITOR OUT jacks, you can monitor using speakers.
Listening to the demo song
The included SD card in the unit contains a demo song.
We will use this demo song to practice listening to and
mixing a recording.
1. Press the HOME button to open the Home screen.
2. When the recorder is stopped, press the MENU
button to open the
MENU
screen.
3. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (highlight green)
SONG
, and then
press the F4 (t) button.
The
SONG LIST
screen opens.
4. Use the JOG/DATA dial or the CURSOR (5/b)
buttons to select
DEMO SONG
, and then press the
F4 (t) button to open a menu list.
5. Use the JOG/DATA dial or the CURSOR (5/b)
buttons to select
LOAD
, and then press the F4 (t)
button.
The
SONG LOAD
pop-up window appears.
6. Press the F2 (
YES
) button to load the demo song.
The demo song is loaded and the window closes, but
the
SONG LIST
screen remains open.
7. Press the HOME button to return to the Home
screen.
8. Press the PLAY (7) button, and raise the levels of
the track and STEREO faders and the MONITOR
LEVEL knob to listen to the demo song.
The STEREO fader adjusts the overall volume of the
mixer output. When the STEREO fader is at 0dB the
overall level is neither increased nor decreased.
Use the track faders to adjust the balance of the tracks.
Use the MONITOR LEVEL knob to adjust the final
monitoring volume.
9. Press the MIXER button to open the
Mixer
screen.
10. Press a SOURCE buttons to select an input (A-H) or
press a SELECT button to select a track to be set.
Then use the PAN knob to set the stereo position
of that input or track. Repeat for other inputs and
tracks.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-32 in the language / languages: English as an attachment in your email.

The manual is 10,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info