617895
72
Zoom out
Zoom in
Previous page
1/80
Next page
72
TASCAM DP-24SD
15 – Messages
General messages
The following list shows the messages that may pop up during the use of the unit.
These messages alert you to conditions that may arise while you are using the unit. Consult the table below if you see something you do
not understand or if you want to know how to solve a problem.
Message Description and remedy
Can not Import
This pop-up appears when the Sample Rate or Sample Bit of the selected file in the AUDIO DEPOT-
IMPORT menu differs from the current song.
Cannot Clear
Current
The current track cannot be deleted.
A virtual track assigned to a physical track cannot be deleted.
Card Error
The card could not be handled properly. Replace the card.
Card Full
The card has no remaining capacity. Erase unnecessary files or move them to your computer to make
open space.
Empty Export Track
You tried to export a track that does not contain any recording data.
This pop-up appears if you try to export a song track that does not contain any recording. (See “Exporting
tracks” on page 69.)
Export a song track that has been recorded.
Export File Too
Big
The track to be exported exceeds the SD card available capacity.
You have tried to export a track to the AudioDepot folder, but the size is too large for the remaining space
on the SD card.
Delete unnecessary songs or files from the AudioDepot folder to create more space on the SD card, then
try to export the track again.
File Not Found
File to be imported could not be found.
You tried to import a WAV file from the AudioDepot folder, but there is no WAV files in it. (See “Importing
tracks” on page 68.)
Connect the unit to a computer and transfer the files that you want to import from the computer to the
AudioDepot folder of the unit.
Format Error
Format CARD
The formatting of the card is abnormal or corrupted. This message also appears if you formatted the card
for FAT format using a computer connected via USB and if an unformatted card is inserted in the unit.
Always use the DP-24SD to format cards to be used with it. Replace the card or format the card using the
FORMAT
menu.
Execution of FAT formatting erases all data currently on the card.
I/O Too Short
Interval between IN and OUT points is too short.
You tried to enter repeat mode, but the time between the IN and OUT points is too short.
Import Failed
Export Failed
Import or export failed.
Import File Too
Large
Size of file to be imported is too big.
You tried to import a WAV file from the AudioDepot folder that is too large for the remaining space on the
SD card. Free up some space in the AudioDepot folder by deleting unnecessary songs, and try again.
In Bounce Mode
Bounce
mode is active.
You tried to perform an action that cannot be done while in
Bounce
mode.
In Master Mode
Mastering
mode is active.
You tried to perform an action that cannot be done while in
Mastering
mode.
In Punch Mode
Auto Punch
mode is active.
You tried to perform an action that cannot be done while in
Auto Punch
mode.
In Repeat Mode
Repeat Playback mode is active.
You tried to perform an action that cannot be done while in Repeat Playback mode.
Invalid Card
The format of the inserted SD card cannot be used in this unit.
Insert another SD card after turning off the unit, or format the card using
FORMAT
on the
MENU
screen.
Invalid Card
Change Card
Something might be wrong with the card. Replace the card.
Mark Full
It is not possible to register more location marks.
You tried to store more than 99 location marks in a song. (See “Location marks” on page 44.)
Delete some location marks and try again.
Master File Not
Found
Master file could not be found.
This message appears if you try to enter
Mastering
mode, but you have not made any mixdown
recording yet. First perform a mixdown recording.
Master Track Too
Large
The master file is too large.
You tried to create a master file that is larger than the remaining available space on the SD card.
Format the SD card (see “Quick formatting an SD card” on page 65 and “Full formatting an SD card” on
page 66), or connect the unit to a computer and delete unnecessary files to create available space in
the card.
MBR Error Init
CARD
The formatting of the card is abnormal or corrupted. Replace the card or format the card using the
FORMAT
menu.
Execution of formatting erases all data currently on the card.
No Card
No SD card is in the unit. Load a recordable SD card.
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-24SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-24SD in the language / languages: English as an attachment in your email.

The manual is 4,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info