617895
14
Zoom out
Zoom in
Previous page
1/80
Next page
14
TASCAM DP-24SD
2 - Quick Guide
Playing back the recording
1. To return to the beginning of the song (ZERO point), press
and hold the STOP (8) button and press the REW (m)
(TO ZERO) button (TO ZERO function).
2. Press the PLAY (7) button to play back the recording on
TRACK 1.
3. Use the fader for TRACK 1 and the STEREO fader to adjust
the playback monitoring level. Use the MONITOR LEVEL
knob to adjust the final monitoring volume.
TIP
Use the PAN knob for TRACK 1 on the Mixer screen to set the
stereo position of the track signal.
Recording a guitar to TRACK 2
Now you should listen to the rhythm guitar on TRACK 1 and play
the lead guitar on TRACK 2.
Follow the procedure below to change the recording source of
the TRACK 2.
1. Press the ASSIGN button to open the Assign screen.
Record the lead guitar sound from INPUT H to TRACK 2. By
default, INPUT B is assigned to TRACK 2.
2. Use the CURSOR (5/b/g/t) buttons or press the
SELECT button for TRACK 2 and align the cursor (frame) on
the Assign screen with
TRACK 2
.
Use the JOG/DATA dial or press the SOURCE button for
INPUT H to set the recording source of the TRACK 2 to
H
.
3. Press the HOME button to return to the Home screen.
4. Press the REC button for TRACK 2.
Its REC indicator blinks and the unit enters record standby.
When you play the guitar, the input level is shown by the
level meter for
2
(TRACK 2).
5. Return to the beginning of the song (ZERO point) and start
playback of the recorded rhythm guitar to play the lead
guitar part along with the recording.
Raise the fader for TRACK 2 to hear both the playback of
TRACK 1 and input guitar signal through your headphones.
6. As necessary, use the faders for TRACK 1 and 2, PAN knobs,
STEREO fader and MONITOR LEVEL knob to adjust the
monitoring level and balance.
7. Return to the beginning of the song, press the RECORD (0)
button to start recording, and play the lead guitar part.
The RECORD (0) button lights red, and the REC indicator
for TRACK 2 stops flashing and becomes lit.
8. After you finish your performance, press the STOP (8)
button to stop recording.
The recorded file is saved in the folder of the currently
loaded song.
9. Press the REC button for TRACK 2 so the REC button
becomes unlit.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-24SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-24SD in the language / languages: English as an attachment in your email.

The manual is 4,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info