534639
27
Zoom out
Zoom in
Previous page
1/108
Next page
TASCAM DP-24 27
3 – Names and Functions of Parts
! VIRTUAL TRACK button/indicator
The
VIRTUAL TRACK
screen appears. (See "Virtual
tracks" on page 59.)
@ BOUNCE button/indicator
Press this button to switch to the Bounce mode (the
button lights).
# MIXDOWN/MASTERING button/indicator
Press this button to switch the Recorder mode among
Multi Track
,
Mixdown
and
Mastering
modes.
In
Multi Track
mode, press this button to
switch to the
Mixdown
mode.
In
Mixdown
mode, press this button to switch to
the
Mastering
mode when there is a master file,
or press it to return to the
Multi Track
mode
when there is no master file.
In
Mastering
mode, press this button to return
to the
Multi Track
mode.
NOTE
The current mode is displayed on the Home screen.
$ METRONOME button/indicator
Press this button to set the metronome.
The button flashes according to the set tempo/beat.
% UNDO/REDO button/indicator
Press this button to undo the immediately previous
action (single undo) or cancel a single undo (redo). (See
"Undoing an operation" on page 50.)
After a single undo or multi-undo, the UNDO/REDO
button becomes lit, showing that an operation has
been undone.
^ MONITOR SELECT button
Press this button to open the
MONITOR SELECT
pop-up window on the Home screen.
& MONITOR LEVEL knob
Use this knob to adjust the output level of the output
signals.
* MARK SET button
During recording or playback, press this button to set
a mark manually.
( AUTO PUNCH button/indicator
Press this button to turn the auto punch mode on and
off.
When auto punch mode is turned on,
Auto Punch
is displayed on the Home screen. (See "Auto punch in/
out" on page 57.)
) IN button
Press this button to locate the IN point.
Press and hold the MARK SET button and press this
button to set the IN point.
Press and hold the JUMPBACK (PREVIEW) button
and press this button to perform the pre-roll playback
up to the current position and stop. (See "Checking
cueing points (preview)" on page 57.)
Q REHEARSE button/indicator
Use this button to turn the Rehearse mode on and off.
In addition to auto punch in/out, you can also use the
Rehearse mode for ordinary recording.
W OUT button
Press this button to locate the OUT point.
Press and hold the MARK SET button and press this
button to set the OUT point.
Press and hold the JUMPBACK (PREVIEW) button and
press this button to perform the post-roll playback
from the current position, return and stop. (See
"Checking cueing points (preview)" on page 57.)
E REPEAT button/indicator
Press to this button to turn Repeat Playback mode on
and off. (See "Using repeat playback" on page 56.)
R JUMPBACK (PREVIEW) button
Press this button to rewind the specified number of
seconds from the current position and start playback.
T CD button
Press this button to open
CD
menu screen.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-24 in the language / languages: English as an attachment in your email.

The manual is 11,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info