617896
67
Zoom out
Zoom in
Previous page
1/76
Next page
TASCAM DP-03SD 67
14 – Troubleshooting
When working with any new piece of equipment like the unit, it’s
sometimes difficult to work out why something isnt happening
the way you expect. The main thing is to take your time—after
all, youre not paying hourly studio rates! Stop and think. Ask
yourself questions, like the ones below, and you can usually find
the answer.
Also, see the “15 – Messages” on page 68 for the meaning
of messages that may pop up on the display. Consult this
table when a message appears when an operation cannot be
completed by the unit.
Why cant I hear any sound when I play back?
Are the track faders of the tracks set to high enough?
Is the MASTER fader set to high enough?
Have you connected the PHONES or LINE OUT jack to your
monitoring system properly, and is your monitoring system
set up correctly?
Is the PHONES LEVEL knob set to high enough?
Why does the sound I'm recording distorted?
Are the TRIM knobs of the INPUT A or INPUT B on the top
panel of the unit set too high? Is the input source too loud?
Isn’t the monitor system distorted as the monitor level is too
high?
Why cant I record?
You must have at least one track armed (REC indicator
blinking) before you start recording by pressing the PL AY (Á)
button while pressing the RECORD ()button.
Are input channels assigned to tracks (see Assigning inputs
on page 34)?
Why cant my computer “see the unit files?
Is the unit connected to the computer via the USB terminal
(see “Connecting with a computer” on page 60)?
Before making the USB connection, songs, tracks, or stereo
master tracks are backed up or exported to the FAT partition?
(Files on the MTR partition cannot directly be read.)
Noise occurs if I connect a passive guitar or bass directly.
Connecting another device to the unit’s line output (LINE
OUT) jacks might reduce the noise.
This might be caused by interference noise from another
device. If there is a power amplifier or other device that uses
a large transformer, a fluorescent light or something similar
nearby, you might be able to reduce the noise by changing
the distance and orientation of this unit in relation to such
equipment.
You might also be able to reduce the noise if you use this
unit’s GROUND connector to ground the unit.
The unit turns off.
This product is compliant with the European ErP standby
power regulations. In order to comply with these regulations,
the automatic power saving function is set to 30 minutes
when the unit is shipped from the factory. So, by default,
the unit will turn off automatically after 30 minutes elapse
without any operation. Change the automatic power saving
function setting if you want to disable it. (See Automatic
power saving function on page 56.)
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-03SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-03SD in the language / languages: English as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info