617896
54
Zoom out
Zoom in
Previous page
1/76
Next page
54 TASCAM DP-03SD
10 – Miscellaneous Functions
Metronome
This unit has a built-in metronome function that can be used
when the recorder is operating. You can set it to function during
both playback and recording or only during recording.
1 Press the METRONOME button to open the
METRONOME
screen.
2 Set the following items. Use the F3 (§) and F4 () buttons
to select each item, and turn the DATA wheel to change the
value.
MODE
OFF
Default, metronome OFF
REC&PLAY
Functions both during
recording and playback
REC ONLY
Functions only during
recording
TEMPO
Set speed from
20
to
250
beats per minute (BPM).
The default setting is
120
.
BEAT
Set the frequency of the accent from
1
to
12
for different
time signatures.
The default setting is
4
.
LEVEL
Set the metronome volume from
0
to
100
.
The default setting is
100
.
3 When finished making settings, press the HOME button to
return to the Home Screen.
The metronome functions according to the
MODE
setting
made in step 2 above.
The metronome signal is not recorded even if set to operate
during recording.
NOTE
When the metronome is operating, you can monitor the
sound of the metronome through connected external
speakers. In this case, the metronome sound might also be
recorded when you use a microphone to record.
When the metronome is operating, you can adjust the
LEVEL
, but other items on the
METRONOME
screen
cannot be changed. Moreover, during recording, you
cannot open the
METRONOME
screen. You can adjust the
LEVEL
if you start recording while the
METRONOME
screen is open and do not switch to a different screen.
TIP
You can use the metronome like a click track to help keep
time when recording the first tracks (rhythm guitar, bass,
etc.) in a song.
If you want to use the metronome when practicing, you
can either turn each track’s fader all the way down during
playback or play a song that does not have any recordings.
Tuner
Use the built-in chromatic tuner to tune guitars and wind
instruments.
In addition to the chromatic tuner mode, which allows you to
tune an instrument while looking at the tuning meter, this unit’s
tuner, also has an oscillator mode that outputs a standard pitch.
Chromatic tuner mode
1 Connect a guitar or bass to INPUT A. INPUT B cannot be
used for tuning.
Use built-in MIC A when tuning wind instruments, for
example.
2 Set the INPUT A switch to GUITAR (see “Selecting the input
sources on page 33).
To use the built-in mic, set the INPUT A switch to INTERNAL
MIC A.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-03SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-03SD in the language / languages: English as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info