617896
43
Zoom out
Zoom in
Previous page
1/76
Next page
TASCAM DP-03SD 43
7 – Recorder Functions
Automatically punching in and out
When an IN point and an OUT point are set, press the AUTO
PUNCH button to enter auto punch in/out mode.
Au
to punch in/out
mode icon
Auto punch in/out mode includes a rehearsal function. When
using this function, monitoring between the IN and OUT points
in the same way as when recording is possible without actually
recording.
Rehearsal
1 When the recorder is stopped, press the MENU button to
open the
MENU
screen.
2 Press the REC buttons on tracks to use auto punch in/out
with them.
3 After setting the IN and OUT points, press the AUTO PUNCH
button to enter auto punch in/out mode.
4 Press the PL AY (Á) key.
Playback begins from two seconds before the IN point, and
the sound monitored on the recording track(s) switches at
the IN point from the track playback sound and the input
sound to just the input sound. The RECORD () indicator
blinks when between the IN and OUT points.
When playback reaches the OUT point, the track playback
sound and the input sound becomes the monitored sound
again, and the RECORD () indicator stops blinking and
turns off. Playback automatically stops one second after the
OUT point.
You can repeat rehearsal until you are satisfied.
Using auto punch in/out to record
When you are done rehearsing, you can use auto punch in/out
for recording.
1 While in auto punch in/out mode, press and hold the
RECORD () button, and press the PL AY (Á) button.
In the same way as during rehearsal, playback begins from
two seconds before the IN point. Recording occurs and the
RECORD () indicator lights between the IN and OUT points.
2. One second after reaching the OUT point, the recorder
automatically stops, auto punch in/out mode is exited and
the transport locates to two seconds before the IN point.
NOTE
Auto punch in/out mode cannot be entered during repeat
mode or if no REC button has been pushed.
Auto punch in/out can be undone.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-03SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-03SD in the language / languages: English as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info