617899
62
Zoom out
Zoom in
Previous page
1/80
Next page
IMPORTANT SAFETY PRECAUTIONS
62 TASCAM DP-02/DP-02CF
4 – DP-02 Appendix
Vocal settings (Vocal)
De-Esser Removes sibilance (ess sounds)
Chorist Choir sound using detuning
Emphasis Adds emphasis to vocals to make them stand out
Shout For loud distorted vocals
Moody Moody feeling for quieter smooth vocal lines
Response Echo vocal setting
Proclaim Echo plus” — a distinctive sound
Quiverin A quavering voice with vibrato
Duet For two (male and female) singers and harmony groups
Lo-Fi Imitates low-fidelity equipment (high and low treated specially)
Megaphon For “megaphone”-type sound
Screamin Screaming sound using flanger
Panning A panned stereo vocal sound
Drum settings (Drum)
These sound good with rhythm machines, etc.
Groove A groove setting with flanger
Stepping Stepping beat — delay with a small amount of feedback
TrnAroun Stereo “bouncing” setting
GetSpace Drum reverb
CsBottom Classic “bass heavy” sound
Trem.Pad Another stereo bounce setting
PerfrmEQ Echo and pan
Lo-Fi Low fidelity for drums
Reverb Reverberation only
Comp. Compressor only
Vibrato A vibrato effect
Filter A creative low-pass filter effect
The reverb effect is available as an alternative to the exter-
nal SEND/ RETURN loop with an external effect processor
(see “Effect processor” on page 13). You cannot use both at
the same time.
T I P
“Reverbis short for “reverberation” the sound produced
by many short echoes off the walls of rooms, etc.
Turning the reverb on and off
Press and hold the SHIFT key and press the REVERB key
to turn the reverb on (the indicator lights) and off (the indi-
cator is unlit).
Using the reverb
When the reverb is on, the mixer EFFECT SEND controls
and the EFFECT RETURN control affect the amount of
signal sent to the internal reverb from the tracks, and
returned from the internal reverb unit to the stereo mix.
When the reverb is turned off, the mixer EFFECT SEND
controls and the EFFECT RETURN control affect the
amount of signal sent to the SEND jack from the tracks,
and returned to the stereo mix via the RETURN jacks.
ª
ª
Setting the reverb type
Bring up the reverb screen by pressing the REVERB key:
Turn the DATA dial to select one of the different “flavors”
of reverb: Hall, Room, Live or Studio. Each of these
settings has a different quality and character.
Setting the reverb time
With the reverb screen displayed, use the cursor (§/)
keys to highlight the value below TIME.
Simply turn the DATA dial to change the time the reverb
sound takes to die away, from 0.1 seconds to 5.0 seconds in
0.1 second steps.
ª
ª
Reverb
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-02CF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-02CF in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DP-02CF

Tascam DP-02CF Additional guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info