617899

Tascam DP-02CF Manual

35
Zoom out
Zoom in
Previous page
1/80
Next page
IMPORTANT SAFETY INSTRUCTIONS
TASCAM DP-02/DP-02CF 35
2 – Advanced techniques
You can set the time between repeats up to 9.9 seconds.
Press and hold the SHIFT key, and press the INTERVAL
key. The screen shows:
Use the DATA dial to set the repeat interval from 0.5
seconds to 9.9 seconds in 0.1 second steps.
T I P
This repeat interval allows you to reposition your
hands for a guitar lick, take a breath for a vocal phrase,
etc., when you are rehearsing.
Press NO/EXIT to exit the interval setting mode.
Setting the repeat interval
Tempo setting
For the bars/beats function to be useful, you must set up a
tempo and time signature. These allow the unit to calculate
where the bar and beat divisions fall, based on the tempo of
your song.
1. With playback stopped, press MENU and select the
MIDI menu.
2. Select the TEMPO/T.SIG (tempo and time signature)
action and press the ¥ cursor or YES/ENTER key:
3. There are two parameters here, the tempo and the
time signature. Use the cursor and DATA dial to set
these.
The tempo is measured in beats per minute (bpm) and can
be set from 20 to 250.
The time signature can be set with the number of beats to
the bar (1 through 12) and the number of beats per whole
note (1, 2, 4, or 8).
T I P
Most rock and pop music is in 4/4 (with a few famous
exceptions). Some country and folk songs, as well as
waltzes, are in 3/4.
Working in bars & beats
Besides working in minutes and seconds (as explained in
detail in “Direct location” on page 29), the unit can work
in musical bars and beats. This is especially useful when
working with external MIDI devices (see “Working with
MIDI” on page 37).
T I P
“Bars” are also sometimes referred to as “measures”.
Selecting the time mode
Once the time signature and tempo are set, the unit can
map the bar and beat divisions to the time.
To display bars and beats: On the “home” screen,
move the cursor to the ABS field:
Turn the DATA dial clockwise. ABS changes to BAR and the
current position in bars and beats is shown, with the tempo
shown on the right of the screen:
With the cursor at BAR, turn the DATA dial counterclock-
wise to return to the time-based display.
Location is performed in the same way as described in
“Location” on page 29, except that there are only two fields
now, bars and beats.
Track editing is also performed in the same way as
described in “About track editing” on page 47, but because
the editing points are now set to a bars and beats-based
position, the editing can be more “musical”.
Location mark and Point editing Even when the
screen shows positions in bars and beats, location points are
edited in minutes and seconds (“To edit a location mark” on
page 29 and “IN, OUT and TO marks” on page 48 ), except
that the bars and beats equivalent is also shown.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-02CF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-02CF in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DP-02CF

Tascam DP-02CF Additional guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info