Manual Tascam DP-02CF (page 29 of 80) (English)

617899

Zoom out

Zoom in

1/80

IMPORTANT SAFETY INSTRUCTIONS

TASCAM DP-02/DP-02CF 29

The operations described here are ones that you may use

less often than the ones described earlier in this manual,

but you will find useful in your work with the unit.

Location

This section tells you how to jump around to different

parts of a song on the unit.

Direct location

The unit displays the current position at the top of the

display as hours:minutes:seconds:frames. There are 30

frames in a second.

NOTE

The unit can also display the current time in bars and

beats. See “Working in bars & beats” on page 35 for

details.

From the “home screen” when the unit is stopped, turn the

DATA dial, so that the top time display blinks.

Use the ˙ and ¥ cursor keys to move the underline cursor

between the different fields of the time shown at the top of

the screen. In this case, the frame field is selected.

To change the value of the underlined field, use the DATA

dial. Fields “wrap round”, so going from 59 seconds to 0

seconds adds 1 to the minutes, etc. As you turn the DATA

dial, the frame field blinks. If you leave the DATA dial

untouched for a few seconds, or if you press YES/ENTER,

the display stops blinking.

If you want to edit another field, use the cursor keys to

move to that field and then use the DATA dial to get to the

time you’re looking for.

Press PLAY (¥) to start playback from the position whose

value has just been entered.

Location marks

The unit can store up to 999 location marks per song! Use

these to mark the start of verses, vocal entry points, etc.

To set a location mark

While stopped, recording or playing, press and hold the

SHIFT key and press the INSERT key at the point where

you want the new mark.

Marks are shown on the display on the second line of the

“home” screen. The mark number you see is the one at or

immediately before the current position In the example

below, “M023” indicates the twenty-third mark in the

selected song.

NOTE

Marks are numbered in the order you enter them, not

according to their position in the song. Mark 999 can

therefore appear in a song before mark 001.

To move to a location mark

Press and release the µ or ≤ keys to move to the previ-

ous or next mark in the song. This works while playing

back, while stopped or “winding”, but not while recording.

Alternatively, press and hold both LOCATE LIST keys

togather to show the location mark list:

Use the DATA dial or the cursor (§/¶) keys to choose a

mark (they’re listed in the order they appear in the song)

and press YES/ENTER to jump to that mark.

To delete a location mark

Stop playback (or recording) and locate to the mark you

want to delete (or a little after). Press and hold the SHIFT

key and press the DELETE key.

NOTE

You can’t undo this.

To edit a location mark

If you made a mistake when you entered a location mark,

you can change the time of the mark.

T I P

This is sometimes called “trimming”.

2 – Advanced techniques

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-02CF in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DP-02CF

Tascam DP-02CF Additional guide - English - 1 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tascam DP-02CF Manual

Product: