617898
14
Zoom out
Zoom in
Previous page
1/80
Next page
IMPORTANT SAFETY PRECAUTIONS
14 TASCAM DP-02/DP-02CF
1 – Starting out with your DP-02/DP-02CF
These inputs enable you to connect condenser microphones
(the same type as those used in professional recording
studios).
NOTE
These XLR inputs are wired with these pin assign-
ments: 1=ground, 2=hot, 3=cold.
The +48V phantom power supply allows you to power
condenser microphones. Without such phantom power,
many condenser microphones will not work. Some, howev-
er, use internal batteries.
WARNING
Never connect or disconnect microphones to or from
the XLR connectors with the phantom power turned
on to avoid a loud pop noise.
Never turn the phantom power on when unbal-
anced dynamic microphones are plugged into the XLR
connectors to avoid any damage to the unit.
Consult any documentation that came with your micro-
phones for full details of power requirements, etc.
Phantom power The PHANTOM switch can be turned
on or off to supply +48V phantom power to the XLR
connectors. Phantom power is not supplied to the 1/4
jacks.
Input level controls Use the input level controls the
same way you would microphones that use 1/4” jacks.
However, some microphones are more powerful than
others, and you may need to turn down the control to
prevent overloading.
Balanced XLR inputs
SEND of the unit to the mono input of the processor (1/4”
unbalanced jack).
NOTE
The DP-02 owns internal reverb processors. However,
you can also use an external effect processor if you
prefer.
Connect the stereo output of the processor to the RETURN
jacks of tthe unit (1/4” unbalanced jack).
External stereo input The unit has a 1/8” stereo mini
jack on the rear panel marked STEREO MIX.
This can be used to connect an external stereo sub-mixer,
synthesizer, drum machine, CD player, etc.
This stereo signal is routed to the analog LINE OUTPUT
jacks. They can not be recorded on the unit, nor can you
adjust the signal level using the unit.
Digital output Use a standard optical cable to connect
this to a suitable digital stereo input of monitoring system,
or stereo recorder.
NOTE
You can connect a digital recorder (CD,MD) using the
digital connection, while using the LINE OUTPUT jacks
for monitoring.
This signals sent from this are the same as those sent from
the LINE OUTPUT jacks (although the STEREO MIX
signals are not output through the digital output).
MIDI output Use this (rear panel) to connect a sequenc-
er, drum machine, etc. which can be started, stopped and
synchronized with the unit. See “Working with MIDI” on
page 37 for details.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-02 in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DP-02

Tascam DP-02 Additional guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info