617893
61
Zoom out
Zoom in
Previous page
1/92
Next page
TASCAM DP-008EX
61
9 – Mixdown and mastering
Mixdown
Adjusting the volumes and stereo positions of the
recorded tracks to create a well-balance stereo mix is
called mixdown.
Level and balance
Use the TRACK 1–8 LEVEL knobs to adjust the
relative balance between tracks. Then, use the
MASTER LEVEL knob to adjust the overall level.
Watching the and level meters on the display,
adjust the levels until they are suitable. If the volume
is too loud, the sound will be distorted.
NOTE
The track level meters on the display show the
recorded signal levels on the tracks. Therefore,
these meters do not change even when the TRACK
LEVEL knobs are adjusted.
TIP
You do not need to keep the entire song at the
same volume. For example, you could gradually
increase the volume during a guitar solo.
Stereo position (panning)
Use the TRACK PAN knobs to adjust the stereo
positions of tracks .
Track equalizers
Each track has a two band equalizer.
Use the
EQ SETTING
screen to set the track equal-
izers.
1. Press the EQ button to open the
EQ SETTING
screen.
2. Set the following parameters for the track equal-
izers.
Parameter Settings
EQ-SWITCH
(track equalizer switch)
On/Off (default: Off)
Hi-F
(high frequency range)
1.7 kHz – 18 kHz
(default: 5 kHz)
Hi-G
(high range gain)
±12 dB (default: 0.0
dB)
Lo-F
(low frequency range)
32 Hz – 1.6 kHz
(default: 350 Hz)
Lo-G
(low range gain)
±12 dB (default: 0.0
dB)
Use the F1 [g] and F2 [t] button to switch the
track being set.
Use the F3 [5] and F4 [b] buttons to select
(highlight) parameters, and use the DATA wheel
to adjust their values.
3. After making track equalizer settings, press the
HOME button to return to the Home Screen.
NOTE
When a track equalizer is ON, that track is shown
on the Home Screen as in the illustration below.
Icons when track
equalizers ar
e ON
Example showing track equalizers active on tracks 1-4
Reverb
This unit has six types of reverb effects.
Adjust the level of the signal sent to the reverb effect
from each track by using their REVERB knobs.
The signals are sent to the reverb effect after the track
equalizer.
1. Press the REVERB button to open the
REVERB
SETTING
screen.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-008EX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-008EX in the language / languages: English as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DP-008EX

Tascam DP-008EX User Manual - French - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info