617897

Tascam DP-004 Manual

29
Zoom out
Zoom in
Previous page
1/112
Next page
3–Names and Functions of Parts
TASCAM DP-004 29
5 UN/REDO key and indicator
Press this to undo the last action. Press again to redo
it. (See “Undoing operations (undo)” on page 66.)
Press this key while pressing and holding the STOP
( ·) key to open the
HISTORY
screen where you can
undo multiple steps.
This indicator lights when one or more operations
that have been undone can still be redone.
6LCD Display
This shows the Home Screen and various other
screens. (See “Display screens” on page 39.)
The display contrast can be changed using the
PREFERENCE
screen. (See “Setting the contrast” on
page 46.)
7 INPUT SETTING key
Press this key to open the
INPUT SETTING
screen
where you can select the input source. (See “Selecting
the input source” on page 54.)
8 INPUT A and INPUT B LEVEL knobs and OL indicators
Use these knobs to adjust the input levels for INPUT
A and INPUT B. (See “Making the first recording” on
page 58.)
If the input source level is too high its OL (overload)
indicator lights. Moreover, even if the input level is
suitable, the OL indicator might light if the LEVEL
knob is turned past 2 or 3 o’clock.
9ASSIGN key
Press this key to open the
INPUT ASSIGN
screen where
you can assign the A and B input channels to tracks.
An assigned channel becomes the recording signal
source for its track. (See “Assigning input channels”
on page 57.)
0 MASTER LEVEL knob
Adjusts the monitoring level of the stereo output
signal.
This knob also adjusts the recording level when
performing a bounce or mix down.
q Track PAN knobs
Use these knobs to adjust the panning of each track
in the stereo mix. (See “Stereo position (panning)” on
page 62.)
w Track LEVEL knobs
Use these knobs to adjust the playback levels of each
track. (See “Level and balance” on page 62.)
e Track REC keys and indicators
Press a REC key to put a track in recording standby
mode (the key flashes). Pressing the key again
cancels recording standby mode. If you press the
PLAY (¥) key while holding down the RECORD (–)
key, recording will begin on every track in recording
standby mode (the REC indicator lights).
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-004 in the language / languages: English as an attachment in your email.

The manual is 7,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info