587270

Tascam DM-3200 Manual

11
Zoom out
Zoom in
Previous page
1/120
Next page
1 – Introduction : Unpacking the DM-3200
TASCAM DM-3200 Owner’s Manual 11
Channel destinations There are 16 busses,
eight aux busses, 16 assignable inserts (not to be con-
fused with the “hard-wired” analog inserts on the
input pre-amps) as well as the stereo buss module.
Outputs from the channels can be assigned to these.
Furthermore, even when working at a sampling fre-
quency of 88.2 kHz or 96 kHz, the DM-3200 retains
the same number of channels and facilities as when
operating at “conventional” sampling frequencies.
Outputs The sources for the outputs (built-in and
optional slot) are then assigned to the actual physical
outputs.
Physical outputs available include the built-in TDIF
outputs (3 sets of eight outputs each), and eight chan-
nels of ADAT “lightpipe”, as well as two stereo digi-
tal and one stereo analog sets of outputs.
Since buss outputs can be assigned to the TDIF and
ADAT ports, this allows all the channels of a sur-
round mix to be recorded together.
The option slot cards typically provide outputs as
well as inputs.
Effects
The DM-3200 incorporates two high-quality digital
effects, including a digital reverb programmed by TC
Works.
Signals may be routed internally to these effects
using busses or aux sends, and the returns fed back to
mixer channels for inclusion in the mix. Alterna-
tively, the assignable inserts may be used to insert
and effect into the signal path of a channel module.
External effects can be looped through the assignable
analog sends and returns (the returns can then be
assigned to channels), or kept in the digital domain
by using the stereo digital I/O facilities.
In addition, channels 1 through 32 can use built-in
dynamic processors to provide compression or
expansion either pre- or post-fader.
Gates can be inserted at the inputs, with a wide range
of triggering options.
There are also analog inserts associated with each
mic/line input, which allow additional processors to
be inserted, before the DA converters. These insert
points can also be used to bypass the DM-3200’s
internal mic amps and patch in external mic amps.
Unpacking the DM-3200
The DM-3200’s box contains the items listed below.
When opening the package please be certain all the
items listed are included. If any items are missing,
please consult your TASCAM dealer.
• The DM-3200
•AC power cable
• A 32MB CF card, pre-formatted, and installed in
the card slot of the DM-3200.
• A USB cable
• A CD-ROM containing the utility software and
documentation for the DM-3200 (Windows and
Mac compatible).
•This manual
•The Quick Reference Guide
• Warranty card.
WARNING
The DM-3200 is a large and bulky piece of equipment.
We strongly suggest that you get someone to help you
lift it out of the carton and locate it in the position
where it will be used.
Lifting properly—When lifting, be sure of your footing
and grip. Bend your legs to get close to the DM-3200,
keeping your back straight, and then lift by straighten-
ing your legs. Hold the unit close to your body. Avoid
twisting or turning your body while lifting or carrying
the DM-3200.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DM-3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DM-3200 in the language / languages: English as an attachment in your email.

The manual is 6,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info