587270
7
Zoom out
Zoom in
Previous page
1/120
Next page
List of Figures
TASCAM DM-3200 Owner’s Manual 7
1 ––Introduction
Figure 1.1: Basic logical components of the
DM-3200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 1.1: Overview of the DM-3200 . . . . . . . . . . . . 14
2 ––Basic operational concepts
Figure 2.1: Control keys . . . . . . . . . . . . . . . . . . . . . . 16
Figure 2.2: Explanation of the top line of screen
displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 2.3: POD controls . . . . . . . . . . . . . . . . . . . . . . 18
Figure 2.4: POD knobs used in a multi-control screen 19
Figure 2.5: POD knob 4 used as list selector . . . . . . . 19
Figure 2.6: POD keys 2 through 4 used as soft keys . 19
Figure 2.7: POD 1 used with a pull-up menu list . . . . 19
Figure 2.8: POD keys used to select sub-screens . . . 19
Figure 2.9: POD keys 2 and 4 used to jump to other
screens (library screens) . . . . . . . . . . . . . . . . . . . 19
Figure 2.10: Encoder functions . . . . . . . . . . . . . . . . . 20
Figure 2.11: Encoders in pan mode . . . . . . . . . . . . . . 21
Figure 2.12: Encoders in EQ gain mode . . . . . . . . . . 22
Figure 2.13: Encoders in EQ frequency selection
mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Figure 2.14: Encoders in frequency Q adjustment
mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Figure 2.15: Encoders used to make frequency band fil-
ter type selections . . . . . . . . . . . . . . . . . . . . . . . . 23
Figure 2.16: Encoders used to make module level and
aux send adjustments . . . . . . . . . . . . . . . . . . . . . 23
Figure 2.17: ENCODER OPERATION menu item . . . . . 23
Figure 2.18: Formatting a CF card . . . . . . . . . . . . . . . 24
Figure 2.19: Shutting down the DM-3200 . . . . . . . . . 25
Figure 2.20: Powering up the DM-3200 with no previous
shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Figure 2.21: Project structure . . . . . . . . . . . . . . . . . . 26
Figure 2.22: Setting the date and time . . . . . . . . . . . 27
Figure 2.23: The NEW PROJECT page . . . . . . . . . . . . 27
Figure 2.24: The project management page . . . . . . . 28
Figure 2.25: Storing a project . . . . . . . . . . . . . . . . . . 29
Figure 2.26: Library management (gate library shown as
example) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Figure 2.27: Library selection pull-up menu . . . . . . . 30
Figure 2.28: Library utility screen . . . . . . . . . . . . . . . 31
Figure 2.29: Setting and editing titles and memos . . 32
Figure 2.30: The SETUP option screen . . . . . . . . . . . . 33
Figure 2.31: Display top line set to SYSTEM . . . . . . . 33
Figure 2.32: The PREFERENCES screen . . . . . . . . . . . 34
Figure 2.33: SOLO options . . . . . . . . . . . . . . . . . . . . . 35
Figure 2.34: UTILITY copy screen . . . . . . . . . . . . . . . 36
Figure 2.35: UTILITY external switch settings . . . . . . 37
3 ––Connections
Figure 3.1: Overview of rear panel features . . . . . . . 38
Figure 3.2: Analog channel inputs and controls . . . . 39
Figure 3.3: DIGITAL SETUP screen . . . . . . . . . . . . . . . 41
Figure 3.4: IF-AN/DM (at left) and IF-AE/DM (at
right) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Figure 3.5: IF-TD/DM (at left) and IF-AD/DM (at right) 42
Figure 3.6: PROJECT CLOCK screen (high-speed) . . . 44
Figure 3.7: Checking the clock sources . . . . . . . . . . . 44
4 ––Routing & assignment
Figure 4.1: Module facilities on the DM-3200 . . . . . .46
Figure 4.2: Routing inputs . . . . . . . . . . . . . . . . . . . . .47
Figure 4.3: Routing outputs . . . . . . . . . . . . . . . . . . . .49
Figure 4.4: Routing inserts . . . . . . . . . . . . . . . . . . . . .50
Figure 4.5: Assignment keys . . . . . . . . . . . . . . . . . . .51
Figure 4.6: Buss assignment screen (linked busses) .51
Figure 4.7: Buss assignments with the pan switch off 52
Figure 4.8: Surround channel assignment screen . . .53
Figure 4.9: Monitoring and metering controls . . . . . .54
Figure 4.10: Monitor parameters screen . . . . . . . . . .55
Figure 4.11: Monitor oscillator and communication
screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Figure 4.12: Metering screen (1st 24 channel module
meters) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
5 ––Channel modules
Figure 5.1: Assign parameters screen . . . . . . . . . . . .59
Figure 5.2: Common “global” module settings . . . . .60
Figure 5.3: Channel fader screen . . . . . . . . . . . . . . . .61
Figure 5.4: Master fader screen . . . . . . . . . . . . . . . . .61
Figure 5.5: Unlinked DYNAMICS screen (channels 1
through 32) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Figure 5.6: Linked DYNAMICS screen (channels 1
through 32) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Table 5.7: Compressor/Expander preset library
entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Table 5.8: Gate/Expander preset library entries . . . .65
Figure 5.9: Assigning dynamics processor triggers . .65
Figure 5.10: Module EQ screen . . . . . . . . . . . . . . . . .66
Figure 5.11: EQ library . . . . . . . . . . . . . . . . . . . . . . . .67
Table 5.12: EQ library presets . . . . . . . . . . . . . . . . . .67
Figure 5.13: Module aux and buss screen . . . . . . . . .68
Figure 5.14: Aux send screen (unlinked) . . . . . . . . . .68
Figure 5.15: Aux pan/balance screen (linked) . . . . . .69
Figure 5.16: Channel module SETUP screen . . . . . . . .70
Table 5.17: Channel delay . . . . . . . . . . . . . . . . . . . . .70
Figure 5.18: Linked pair balance controls . . . . . . . . .71
Figure 5.19: Digital trim setting . . . . . . . . . . . . . . . . .71
Figure 5.20: Channel delay screen . . . . . . . . . . . . . . .72
Figure 5.21: Master delay screen . . . . . . . . . . . . . . . .72
Figure 5.22: Linking modules . . . . . . . . . . . . . . . . . . .73
Figure 5.23: Stereo linking screen . . . . . . . . . . . . . . .73
Figure 5.24: Mute grouping . . . . . . . . . . . . . . . . . . . .73
Figure 5.25: Clearing a group . . . . . . . . . . . . . . . . . . .74
Figure 5.26: Grouping groups . . . . . . . . . . . . . . . . . .74
Figure 5.27: Fader grouping . . . . . . . . . . . . . . . . . . . .74
Figure 5.28: Selecting surround mode . . . . . . . . . . . .75
Table 5.29: Buss assignments in surround mode . . . .75
Figure 5.30: Surround assignment . . . . . . . . . . . . . . .76
Figure 5.31: Surround overview . . . . . . . . . . . . . . . . .76
Figure 5.32: Module surround panning . . . . . . . . . . .76
Figure 5.33: Surround panning (pan mode on) . . . . .77
Figure 5.34: Surround screen (pan mode off) . . . . . .78
Figure 5.35: LFE level . . . . . . . . . . . . . . . . . . . . . . . . .78
Figure 5.36: Snapshot library . . . . . . . . . . . . . . . . . . .79
Figure 5.37: Storing a snapshot . . . . . . . . . . . . . . . . .80
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DM-3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DM-3200 in the language / languages: English as an attachment in your email.

The manual is 6,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info