617901
55
Zoom out
Zoom in
Previous page
1/64
Next page
TASCAM DA-6400/DA-6400dp
55
11 – Other Settings, Information Screens and Keyboard Operations
Setting the power redundancy check
function (DA-6400dp only)
The DA-6400dp has two power supply circuits to allow
redundant power, which can prevent problems caused by power
supply issues.
When shipped new from the factory, the power redundancy
check function is set to ON. To use this function, connect each
circuit to a different power supply.
When the power redundancy check function is ON, if the unit
determines that one power supply connection has been inter-
rupted, the INFO indicator will light red.
To disable the power supply redundancy check function, select
the
POWER REDUNDANCY CHECK
item on the
PREFER-
ENCES
page.
1. Select the
POWER REDUNDANCY CHECK
item on the
PREFERENCES
page to open the
POWER REDUN-
DANCY CHECK
screen. (See “Menu operation procedures”
on page 16.)
2. Turn the power redundancy check function on or off.
Options:
ON
(default),
OFF
3. Confirm the setting and return to the Menu Screen.
NOTE
When making a setting, you can press the EXIT [PEAK
CLEAR] button to cancel the changes and return to the
Menu Screen.
Exporting/importing system backup
data
You can export the system backup data from the unit's built-in
memory to a USB flash drive connected to the USB2.0 port on
the front of the unit. You can also import this data.
1. Select the
SYSTEM BACKUP
item on the
SYSTEM
SETUP
page to open the
SYSTEM BACKUP
screen. (See
“Menu operation procedures” on page 16.)
2. Select whether to export or import system backup data to or
from a USB flash drive.
Export
: export system backup data to a USB flash
drive
Import
: import system backup data from a USB flash
drive
3. Press the MULTI JOG dial.
A confirmation pop-up message will appear.
Pop-up message when set to Export
Pop-up message when set to Import
4. Press the MULTI JOG dial again.
A confirmation pop-up message appears again.
Pop-up message when set to Export
Pop-up message when set to Import
5. When the confirmation message is open, press and hold the
MULTI JOG dial to begin exporting to or importing from the
USB flash drive.
When exporting/importing ends, the
SYSTEM BACKUP
screen reopens.
NOTE
When
Import
was selected, one of the following pop-up
messages will appear if importing did not complete
properly.
If the connected USB flash drive does not contain a
system backup data file
If the system backup data file on the connected USB
flash drive does not contain valid data
If importing completed, but some data with problems
was not imported (part of the system backup data file is
damaged)
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-6400 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info