617901
28
Zoom out
Zoom in
Previous page
1/64
Next page
28
TASCAM DA-6400/DA-6400dp
4 – Recording
Adding marks manually when
recording
You can manually add a mark to a take where you want it when
recording, allowing you to find that point again quickly during
playback.
NOTE
Moving between marks is only possible when stopped,
playing back or in playback standby.(See “Moving to marks”
on page 45.)
Adding marks when recording
During recording when the Home Screen is open, to add a mark
at a desired point, press the MULTI JOG dial when that point
comes.
NOTE
The maximum number of marks that can be added to a take
is 99. The mark data is stored in the file.
You can also add marks when the unit is stopped, playing
back or in playback standby. (See “Adding marks” on page
45.)
A mark added manually will be named “MARKxx”*.
*The “xx” is a number given to all marks that is incremented
in order.
Setting the pause mode function
You can set the pause mode function to either divide the file or
not whenever you switch the unit from recording to recording
standby (pausing).
1. Select the
PAUSE MODE
item on the
REC OPTIONS
page to open the
PAUSE MODE
screen. (See “Menu
operation procedures” on page 16.)
2. Set the pause mode function.
Options
SPLIT
(default): Create a new file whenever recording
is paused
NO SPLIT
: Do not create a new file whenever
recording is paused
3. Confirm the setting and return to the Menu Screen.
Setting input signal routing
Set the input signal routing.
1. Open the
INPUT ROUTING 1
page or the
INPUT
ROUTING 2
page and select the channel that you want to
change. (See “Menu operation procedures” on page 16.)
2. This opens the
INPUT ROUTING
screen for the selected
channel.
INPUT ROUTING
screen
CHANNEL 1-8
3. Set the signals input to the channel.
Options:
SLOT1 1- 8
(default for CHANNEL 1-8)
SLOT1 9-16
(default for CHANNEL 9-16)
SLOT1 17-24
(default for CHANNEL 17-24)
SLOT1 25-32
(default for CHANNEL 25-32)
SLOT1 33-40
(default for CHANNEL 33-40)
SLOT1 41-48
(default for CHANNEL 41-48)
SLOT1 49-56
(default for CHANNEL 49-56)
SLOT1 57-64
(default for CHANNEL 57-64)
SLOT2 1- 8
SLOT2 9-16
SLOT2 17-24
SLOT2 25-32
SLOT2 33-40
SLOT2 41-48
SLOT2 49-56
SLOT2 57-64
4. Confirm the setting and return to the Menu Screen.
Making I/O card settings
After installing an I/O card (sold separately) in SLOT 1 or SLOT 2,
information about that card and its settings are available on the
SLOT 1
or
SLOT 2
page.
When IF-MA64/EX installed
NOTE
No Card
is shown when no I/O card (sold separately) is
installed.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-6400 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info