617901

Tascam DA-6400 Manual

22
Zoom out
Zoom in
Previous page
1/64
Next page
22
TASCAM DA-6400/DA-6400dp
4 – Recording
In this chapter, we explain basic recording operation procedures.
NOTE
The maximum number of recording channels for this unit
depends on the sampling frequency as follows.
o 44.1/48kHz: 64 channels
o 88.2/96kHz: 32 channels
Restrictions on recording operations
Due to the specifications of this unit, recording will be restricted
when the total number of files and folders inside one folder
becomes great. This restriction is as follows.
•
Recording might be restricted when the total number of
files and folders inside a single folder exceeds 10,000
In this case, recording a new take from a stopped state
might not be possible.
If such a folder is loaded, recording to that folder might not
be possible. The following pop-up message will appear in
such cases. At such times,
Rec Limit
will also appear in
the remaining recordable time area on the Home Screen.
CAUTION
The total number of files and folders inside a folder includes
files and folders created by devices other than this unit.
This also includes files and folders that ordinarily cannot be
seen, including management files and system files.
Setting the master clock
The unit's master clock can be set.
CAUTION
Set up a system with multiple connected digital audio
devices so that it uses only one master clock.
1. Select the
CLOCK MASTER
item on the
GENERAL
page
to open the
CLOCK
screen. (See “Menu operation proce-
dures” on page 16.)
2. Set the master clock.
Option Meaning
Internal
(default)
The unit's internal clock is used.
WORD
Synchronize with the word clock signal
input through the WORD/VIDEO IN
connector.
VIDEO
Synchronize with the video clock signal
input through the WORD/VIDEO IN
connector.
SLOT 1
Synchronize with the SLOT 1 digital
signal clock.
SLOT 2
Synchronize with the SLOT 2 digital
signal clock.
3. Confirm the setting and return to the Menu Screen.
NOTE
•
When synchronizing with video clock, the frame rate of the
input signal and this unit’s TC FRAME TYPE setting must
match. (See “TC FRAME TYPE” on page 37.)
•
If synchronization with the set master clock is not possible,
the unit will switch to its built-in clock and an asterisk (*) will
appear at the end of the selected setting name.
•
When synchronization with the external master clock
becomes possible again,
External Clock
Regained. Switch to External?
will appear
as a pop-up message.
Press the MULTI JOG dial to switch from using the built in
clock to using the external clock as the master clock.
Press the EXIT [PEAK CLEAR] button to close the pop-up
menu and continue using the built-in clock as the master
clock. In this case,
* (Regained)
will appear at the end
of the selected setting name.
•
When
* (Regained)
appears at the end of the selected
setting name, press the MULTI JOG dial to open a
Switch
to Regained External Clock?
pop-up
message. Press the MULTI JOG dial to switch from using the
built in clock to using the external clock as the master clock.
Press the EXIT [PEAK CLEAR] button to close the pop-up
menu and continue using the built-in clock as the master
clock.
CAUTION
When switching the master clock, noise might occur in the
audio input and output.
Be aware of this when choosing when to change the master
clock.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-6400 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info