587269

Tascam DA-3000 Manual

13
Zoom out
Zoom in
Previous page
1/60
Next page
TASCAM DA-3000
13
2 – Names and Functions of Parts
Rear panel
o L/R ANALOG INPUTS (BALANCED)
These balanced analog XLR input connectors have a default
nominal input level of +4 dBu, but it can also be set to +6
dBu.
(1: GND, 2: HOT, 3: COLD)
(See “Setting the reference level” on page 25.)
p L/R ANALOG INPUTS (UNBALANCED)
These analog RCA pin input jacks have a nominal input level
of −10 dBV.
a L/R ANALOG OUTPUTS (UNBALANCED)
These analog RCA pin output jacks have a nominal output
level of −10 dBV.
s L/R ANALOG OUTPUTS (BALANCED)
These balanced analog XLR output jacks have a nominal
output level of +4 dBu, but it can also be set to +6 dBu.
(1: GND, 2: HOT, 3: COLD)
(See “Setting the reference level” on page 25.)
d DIGITAL IN(S/PDIF / CASCADE)
These are digital audio input connectors.
This digital input jack has a sampling rate converter that
supports 32 —192 kHz. (See “Using the sampling rate
converter” on page 23.)
When connecting this unit to cascade multiple units, connect
the DIGITAL OUT(S/PDIF / CASCADE) jack of another unit
to this jack. (See “Connections and preparations” on page
42.)
f DIGITAL OUT(S/PDIF / CASCADE)
This digital output jack can output digital audio in
IEC60958-3 (S/PDIF) format.
To connect multiple DA-3000 units, connect the DIGITAL IN
(S/PDIF / CASCADE) jack of another unit to this jack. (See
“Connections and preparations” on page 42.)
g DIGITAL IN (AES/EBU)
This balanced XLR digital audio input jack supports the input
of AES3-2003/IEC60958-4 (AES/EBU) format digital audio.
This digital input jack has a sampling rate converter that
supports 32 —192 kHz. (See “Setting the reference level” on
page 25.)
h DIGITAL OUT (AES/EBU)
This balanced XLR digital audio output jack can output
digital audio in AES3-2003/IEC60958-4 (AES/EBU) format.
CAUTION
When the DIGITAL IN/OUT (SDIF-3) connectors are
connected, the DIGITAL IN/OUT (S/PDIF / CASCADE) and
DIGITAL IN/OUT (AES/EBU) connectors cannot be used to
input and output digital audio signals.
j DIGITAL IN/OUT(SDIF-3) connectors
These are digital audio input and output connectors for DSD
signals.
These are digital audio input and output connectors for the
SDIF-3 (DSD-raw) format.
Each connector carries either the left or right channel of the
stereo signal.
CAUTION
When the DIGITAL IN/OUT (SDIF-3) connectors are
connected, all digital audio devices (including this unit) in
the system must be synchronized to the same clock source.
To sync this unit to an external clock, input a 44.1kHz clock
signal through its WORD SYNC IN connector.
If the clock master within the system is set to 44.1kHz, DSD
audio sources will become clock slaves. For details see,
“Setting the master clock” on page 25.
k WORD SYNC IN connector
Use to input a word clock signal.
When syncing this unit to an external clock signal, the word
clock signal input through this connector is used.
l WORD SYNC THRU/OUT connector
This is a BNC word clock through/output connector that can
output a word clock signal (thru or 44.1kHz, 48kHz, 88.2kHz,
96kHz, 176.4kHz or 192kH).
Use the THRU/WORD OUT switch to change between thru
and word output.
; 75Ω ON/OFF [THRU/WORD OUT] switch
Use to make the following settings.
o Whether or not the WORD SYNC IN connector has
termination resistance (75 Ω)
o WORD SYNC THRU/OUT connector THRU/OUT
setting
z AC IN connector
Connect the included power cord here.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-3000 in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DA-3000

Tascam DA-3000 User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info