587266
9
Zoom out
Zoom in
Previous page
1/28
Next page
TASCAM CG-1800/CG-1000 9
2 – Names and functions of parts
0 PANEL LOCK switch
Slide this switch to the right to disable all operation from the
front panel. To enable operation from the front panel, slide
this switch to the left.
NOTE
The INFO and HOME buttons, as well as the
INFOR-
MATION
and
ERROR
Information screens can still be used.
q MENU button
When the Home Screen is open, press this button to open
the menu screen.
w EXIT/CANCEL button
When a setting screen is open, press this button to go back
one level in the menu.
When a pop-up message appears, press this button to
answer “NO”.
e USB port
Use to connect USB flash drives.
By connecting a USB flash drive, you can export and import
presets and output operation logs.
Rear panel
8CG-1800 Rear panel
8CG-1000 Rear panel
r VIDEO INPUTS (BNC connectors) (CG-1800 only)
These are video clock input connectors.
t WORD/EXT INPUTS (BNC connectors)
These are word clock/10MHz clock input connectors
y AES3/11 INPUT (balanced XLR connector)
When using an AES3 or AES11 signal as reference clock,
input the signal through this connector.
u WORD 11/12 (256Fs) OUTPUTS (BNC connectors)
These are word clock output connectors.
These output word clock signals based on the audio clock
generated by this unit.
Using the menu setting, you can also set these to output
signals with a ×256 Fs.
i WORD 1–10 OUTPUTS (BNC connectors)
These are word clock output connectors.
These output word clock signals based on the audio clock
generated by this unit.
o AES3/11 1/2 OUTPUTS (balanced XLR connectors)
These output AES3/11 signals based on the audio clock
generated by this unit.
p S/PDIF 1/2 OUTPUTS (RCA pin jacks)
These output S/PDIF signals based on the audio clock
generated by this unit.
a VIDEO 1–4 OUTPUTS (BNC connectors) (CG-1800 only)
These are video clock output connectors.
These output video clock signals based on the video clock
generated by this unit.
s CALIBRATION INPUT (BNC connector)
When calibrating this unit’s internal oscillator, input a
calibration signal (10MHz signal generated from a GPS
signal, PPS signal, etc.) through this connector.
d AC IN connector
Connect the included power cord here.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CG-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CG-1000 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam CG-1000

Tascam CG-1000 User Manual - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info