587266
6
Zoom out
Zoom in
Previous page
1/28
Next page
6 TASCAM CG-1800/CG-1000
1 – Introduction
Thank you very much for purchasing a TASCAM CG-1800/
CG-1000 Master Clock Generator.
Before using this unit, please read this manual thoroughly to
ensure you understand how to operate it correctly. We hope
that you will enjoy using this unit for many years.
After you have finished reading this Owners Manual, please
keep it in a convenient place for future reference. You can also
download a copy of this manual from the TEAC Global Site
(http://teac-global.com/).
Features
Internal oscillation element uses a high-precision OCXO
(oven-controlled crystal oscillator), which is not affected by
environmental temperature
Creating systems with even higher precision is possible
using an external input connector that supports 10MHz
Jitter management circuit provide stable clock
Glitch-free relocking circuit prevents noise and skipping
during clock dropouts and recovery
Numerous output connectors, including 12 word clock
outputs, enable use even in large-scale video/audio
synchronization systems
Supports input and output of a variety of video signal
formats, including NTSC, PAL and HD tri-level (CG-1800
only)
AES3 and AES11 signals can also be used for external
master clock input sources
Analyze function can measure output device termination
(CG-1800 only)
Word clock output level adjustment function allows signals
to be provided to other devices at optimal levels
Self-calibration function using an external oscillator
(atomic/GPS 10MHz, GPS PPS)*
Word clock up to 192 kHz supported
Supports 0.1% PULL UP/DOWN between 24F (Film) and
29.97F (NTSC) and 4% PULL UP/DOWN between 24F (Film)
and 25F (PAL) (CG-1800 only)
Up to 4 system settings can be saved to buttons for recall,
and saved settings can be imported and exported via USB
Tough nut-coupling BNC connectors made by Amphenol
Construction uses independent circuit boards for each
connector to prevent contact failures due to twisting
Three-prong inlet type power cable included
Panel-lock switch to prevent misoperation
128x64-pixel organic EL display with a wide viewing angle
Aluminum front panel that matches other studio
equipment
Firmware updates possible using the USB port
EIA 1U rackmount size
RoHS-compliant
*Use of the self-calibration function requires preparation of
a separate PPS-output 10MHz oscillator with a built-in GPS
antenna.
Included items
This product includes the following items.
When opening the package, be careful to prevent damaging the
items. Keep the box and packing materials for transportation in
the future.
Please contact TASCAM if any of these items are missing or have
been damaged during transportation.
Main unit ..............................................................................................× 1
Power cord ...........................................................................................× 1
Rackmount screw kit ........................................................................× 1
Owners manual (this document) ................................................× 1
The warranty is included at the end of this manual.
Conventions used in this manual
The following conventions are used in this manual.
Buttons, connectors and other physical parts of this unit are
written using a bold font like this: MENU button.
Text displayed on the display of the unit appears like this:
REFERENCE
.
The location highlighted (light on dark) on the display is
referred to as the cursor in some cases.
The sampling frequency used for the audio clock is called
the "audio clock frequency".
Additional information is provided as necessary in tips,
notes and cautions
TIP
These are tips about how to use the unit.
NOTE
These include additional explanations and special cases.
CAUTION
Failure to follow these instructions could result in injury,
equipment damage or lost data, for example.
Trademarks
TASCAM is a trademark of TEAC Corporation, registered in
the U.S. and other countries.
Other company names, product names and logos in this
document are the trademarks or registered trademarks of
their respective owners.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CG-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CG-1000 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam CG-1000

Tascam CG-1000 User Manual - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info