587266
28
Zoom out
Zoom in
Previous page
1/32
Next page
28 TASCAM CG-2000
9 – Other functions
2. Press the MULTI JOG dial to open the
VERSION
screen.
The
VERSION
screen shows information about the
firmware version and build number.
3. Press the EXIT/CANCEL button to return to the menu
screen.
NOTE
When the
VERSION
screen is open during step 2 above,
press the MULTI JOG dial to switch to firmware updating.
For the latest information about updating firmware, visit
the TEAC Global Site (http://teac-global.com/).
Checking the error log
Follow these procedures to check the error log, which contains
information about past errors.
Check the error log from the
LOG
page.
1. Press the MENU button repeatedly to open the
LOG
page
menu, and turn the MULTI JOG dial to select the
ERROR
LOG
item.
2. Press the MULTI JOG dial to open the
ERROR LOG
screen.
In the error log, each error is shown on a separate page.
Error log page example
1 Error log number
These numbers are assigned to errors in order as they are
added to the log.
2 Error date and time
This shows when the error was added to the log.
3 Error summary
This shows the error code and signal affected as described
in the Overview of error codes table. (See “Overview of error
codes” on page 11.)
4 Signal that error affected
This shows the signal that the error affected.
5 Error result
This shows what happened because of the error.
6 Recovery date and time
This shows when the unit recovered from the error.
7 Recovery summary
This shows how the unit recovered from the error.
8 Recovery result
This shows what happened when the unit recovered.
Default setting values list
The factory menu defaults and preset values are as follows.
Menu page Menu item Default Preset
REFERENCE
SELECT INTERNAL
REDUNDANT OFF
RED. SEQ. PREF. PRI.
SECONDARY *1
FORCE RELOCK OFF
VIDEO CLOCK
FORMAT NTSC
FRAME RATE 29.97 (*2)
AUTO RATE OFF
AUDIO CLOCK
SAMPLE 48kHz
PULL UP/DOWN 0.0%
AUTO RATE OFF
WORD 11/12 x1
AES AES3
S/PDIF S/PDIF
TERMINATION
VIDEO A 75ohm
VIDEO B 75ohm
WORD A 75ohm
WORD B 75ohm
GPS 50ohm
WORD OUT LEVEL
1/2 2.5V
3/4 2.5V
5/6 2.5V
7/8 2.5V
9/10 2.5V
11/12 2.5V
UTILITY 1
POWER RED. OFF
BRIGHTNESS 7
STARTUP LAST(*3)
: Saved in preset
– : Not saved in preset
*1: The default and preset values are different for each reference
clock.
Reference clock Secondary reference clock
INTERNAL -
VIDEO A VIDEO B
VIDEO B -
WORD A WORD B
WORD B -
AES WORD B
*2: The default and preset values of the
FRAME RATE
item
are different for each video format.
Video format Video frame rate
NTSC 29.97
PAL 25
1080i / 1080Psf 29.97
1080P / 720P 59.94
*3: This will not be restored to the factory default even if the
FACTORY PRESET
item is executed.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CG-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CG-1000 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam CG-1000

Tascam CG-1000 User Manual - English - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info