161727
27
Zoom out
Zoom in
Previous page
1/32
Next page
TASCAM CD-RW900 27
Erasing tracks
This operation erases the specied track and all sub-
sequent tracks from a recorded CD-RW disc.
1 During stop, press the ERASE/DEL key on the front
panel or the ERASE key on the remote control. Se-
lect the
ERASE TRACK?
rotating the MULTI JOG
dial or pressing the SKIP keys on the remote con-
trol.
To cancel the operation at this point, press the
ERASE/DELor the ERASE key again.
2 Push the MULTI JOG dial or press the ENTER key
to enter the function.
The display shows Erase XX-XX (the number of the
rst track and last track to be erased).
Rotate the MULTI JOG dial or press the SKIP key to
change the track numbers you desire to erase.
To cancel the operation at this point, press the
ERASE/DELor the ERASE key again.
3 Push the MULTI JOG dial or press the ENTER key
to operate the function.
The display shows
Sure?
To cancel the operation at this point, press the
STOP key.
4 Push the MULTI JOG dial or press the ENTER key
again to proceed the operation.
The display shows the
Erase
ashing and the re-
maining time. The unit starts counting down from a
time shown on the display.
NOTE
Once the operation is proceeded, the STOP key cannot
function. Please conrm before the operation.
5 When the tracks have been erased,
Complete
will
appears on the display.
Erasing a whole disc
When you want to erase a whole disc (all the tracks on
a disc), follow the procedure below:
1 During stop, press the ERASE/DEL key on the front
panel or the ERASE key on the remote control. Se-
lect the
ERASE DISC?
rotating the MULTI JOG dial
or pressing the SKIP keys on the remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE key again.
2 Push the MULTI JOG dial or press the ENTER key
to enter the function.
The display shows
Sure?
.
To cancel the operation at this point, press the
STOP key.
3 Push the MULTI JOG dial or press the ENTER key
again to proceed the operation.
The display shows the
Erase
ashing and the re-
maining time. The unit starts counting down from a
time shown on the display.
NOTE
Once the operation is proceeded, the STOP key cannot
function. Please conrm before the operation.
4 When the disc has been erased,
Complete
appears
then
Blank Disc
will appear on the display.
Refreshing a disc
Refreshing the disc makes a disc usable again. This op-
eration destroys all data on the disc.
1 Load the disc, and the unit in stop mode, press the
ERASE/DEL key on the front panel or the ERASE
key on the remote control. Select the
REFRESH?
rotating the MULTI JOG dial or pressing the SKIP
keys on the remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE key again.
2 Push the MULTI JOG dial or press the ENTER key
on the remote control to enter the function.
The display shows
Sure?
To cancel the operation at this point, press the
STOP key.
3 Push the MULTI JOG dial or press the ENTER key
again to proceed the operation.
The display shows the
Erase
ashing and the re-
maining time. The unit starts counting down from a
time shown on the display.
4 When the disc has been refreshed,
Complete
will
appear on the display, and
Blank disc
shows up.
6-After recording
Erasing
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam cdrw900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam cdrw900 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info