587265
31
Zoom out
Zoom in
Previous page
1/40
Next page
IMPORTANT SAFETY INSTRUCTIONS
31 TASCAM CD-VT2
Using mics with the trainer
3 Use the VALUE (+, –) keys to adjust the level. The level
knob icon rotates as you change the value.
NOTE
The input meter at the bottom of this screen shows the
total level of the signal input at the MIC IN jacks.
Using built-in effects
This device has a built-in mic effects processor. Press the
EFFECT key to open the EFFECTOR screen.
As shown in the gure above, in addition to BANK and
PRESET, the EFFECTOR screen also shows the LVL (level)
knob, an icon for the selected mic effect and the VCH (voice
change) icon. These all have adjustable settings.
Use the CURSOR (˙, ¥) keys to move between the LVL knob,
effect parameter knob and voice change icon. When you select
the LVL knob or other parameter, a pop-up appears for the
setting items. Use the CURSOR (§, ) keys to select settings
in the pop-up, and use the VALUE (+, –) keys to adjust these
settings.
BANK
Select bank 0105 or BYPASS.
Using the PRESET item explained below, you can set a
preset effect for each bank. By making presets of settings that
you use frequently in each bank, you can quickly recall the
settings you desire just by switching through the banks.
Select BYPASS if you do not want to use effects.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-VT2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-VT2 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info