587265
14
Zoom out
Zoom in
Previous page
1/40
Next page
14 TASCAM CD-VT2
IMPORTANT SAFETY PRECAUTIONS
Quick Start GuideBasic Operation
Using the Effects
To apply effects to the signal input through the mic, press the
EFFECT key to open the EFFECTOR screen. When the BANK
value is highlighted as shown below, use the VALUE (+, –) keys
to select one of the effect banks (0105).
After selecting an effect bank, select an effect preset by using
the down CURSOR () key to highlight the PRESET value.
Then use the VALUE (+, –) keys to select a preset. Each preset
uses a different combination of effect modules. (See the
“Effect preset list” on page 39.)
Press the right CURSOR key (¥) to open the effect level
adjustment screen. Use the VALUE (+, –) keys to change the
level.
NOTE
You can change the parameter settings for every effect.
(For details, see “Using built-in effects” on page 31.)
Singing or playing along with a CD
You can listen to the sound from both a CD and your voice or
instrument at the same time through headphones. To change
the volume balance between the CD and the mic input, press
the LEVEL key to open the LEVEL screen. Press the right
CURSOR key (¥) to highlight the MIC 1 LEVEL value,
then use the VALUE (+, –) keys to adjust the mic volume. (See
Adjusting the input level” on page 30)
Turning off the power
When you stop using the player, press the POWER switch on
the back of the unit for about one second. Release the switch
when “TRAINER SERIES” appears on the display.
Restoring all settings to original values
If you press and hold both the µ and keys when you turn
the player power ON, the INITIALIZE screen appears.
After startup, follow the onscreen instructions and press the
¥ key to restore every effect parameter, playback setting
and other adjustable setting to the values they were set at when
they unit was shipped from the factory.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-VT2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-VT2 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info