587264
12
Zoom out
Zoom in
Previous page
1/42
Next page
IMPORTANT SAFETY PRECAUTIONS
12 TASCAM CD-RW901SL
2 − Features of the CD-RW901SL
12 TASCAM CD-RW901SL
Display
@
DF G H JK
$ & * ( ) Q E
Y
U
I
O
P
A
W%#
S
^
R
T
This display shows various types of operation information,
including CD disc information, deck operation modes, and
menu status.
@TOC The TOC indicator lights up red when a loaded disc
contains TOC (Table of Contents) data.
#Track number display During playback or selection,
the track number is displayed.
When Incremental playback is on, and when in play-
back or playback ready mode, the TRACK indicator blinks.
$MP3 The MP3 indicator lights when a MP3 disc is in
the deck.
%Counter display Depending on the time display mode,
TOTAL or REMAIN are lit. The counter display indication
are in minutes (three digits) and seconds (two digits).
^KEY The KEY indicator lights when Key Control is on.
&PITCH The PITCH indicator lights when Pitch Control is on.
*A.CUE The A.CUE indicator lights when Auto Cue is on.
(A.READY The A.READY indicator lights when Auto
Ready is on.
)A. TRACK The A.TRACK indicator lights when the Auto
Track is on.
QMeter This displays the playback level, as well as the
input level of the source device.
WA-B The A-B indicator lights when the A-B repeat func-
tion is on.
Also, this flashes until a “B-point” is entered.
EREPEAT The REPEAT indicator lights when the Repeat
function is on.
RSYNC The SYNC indicator lights up when SYNC is on.
TREC When the SRC function is on, this lights during
recording, or in recording standby mode.
When the SRC function is off, this flashes during
recording, or in recording standby mode.
YOPTICAL The OPTICAL indicator lights when the input
source is set to optical.
UCOAXIAL The COAXIAL indicator lights when the input
source is set to coaxial.
c DIGITAL IN/OUT (AES/EBU) These two XLR connec-
tors accept and output digital audio in standard profes-
sional format.
v ANALOG INPUT (BALANCED) (L, R) These XLR
connectors accept analog audio signals at +4 dBu from
suitably-equipped units.
The wirings are: 1=grounding, 2=hot, 3=cold.
bm ATT control right and left Use a small Phillips
screwdriver with these attenuators to reduce the output
level from either the right or left balanced analog
output. The adjustable level is up to -10 dB.
n ANALOG OUT (BALANCED) (L, R) These XLR
connectors output analog audio signals at +4 dBu to
suitably-equipped units.
The wirings are: 1=grounding, 2=hot, 3=cold.
,
CONTROL I/O (RS-232C) terminal RS-232C compati-
ble serial control from an external PC can be performed.
.
CONTROL I/O (parallel) terminal Use this 15-pin
D-sub connector to connect the unit to suitably-
equipped units, allowing control of the CD-RW901SL.
The pinouts of this connector are described (see
Connections” on page 9).
/
REMOTE IN terminal Connects the supplied
RC-RW901SL remote control unit.
!
AC IN jack Connects the power cable supplied.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-RW901SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-RW901SL in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info