587262
17
Zoom out
Zoom in
Previous page
1/36
Next page
TASCAM CD-RW900MKII 17
4 − Playback operations
The CD -RW900MKII can be used to play back CDs (including
CD-R and CD-RW discs that have been recorded and finalized
on other types of recorder), as well as CD-R discs and CD-RW
discs that have been recorded on the unit.
Audio files in MP3 format on CD-ROM, CD-R and CD-RW are
also playable on the unit.
Track selection
Skipping track numbers backward or forward.
1. Select desired tracks for playback with the MULTI
JOG dial on the front panel. Turning clockwise
skips the track number backward and counter-
clockwise skips forward.
Or, press the SKIP key on the remote control.
Pressing
Â
key skips the track number back-
ward and
¯
key skips forward.
2. Press the PL AY key to start playback.
Or, press the PAUSE key to cue the track and enter
playback standby mode after moving to the head
of the selected track. To start playback, press the
PLAY key.
Using the skip function
Simple playback operations
WARNING
If you are monitoring using headphones, first adjust
the level control to low on the unit, then connect
to the PHONES jack before playing back. This will
prevent any possible damage to your hearing.
NOTE
The explanation in this manual will assume the user is
starting from the normal Continuous mode.
1. Press the POWER switch to turn on the unit.
2. Press the
OPEN/CLOSE
key to open the disc tray.
The display shows Open. Insert a disc in the tray
with the label side up.
3. Press the
OPEN/CLOSE
key to close the tray. The
display shows Close when a disc is loaded into the
unit, then TOC Reading will appear, with the peri-
od flashing.
When the TOC has been read, the display shows the number of
tracks and total running time of the disc.
Disc type
Total running timeTotal number of tracks
The CD -RW900MKII also shows one of the following:
TOC A disc finalized
MP3 A disc contains MP3 files
4. Press the PLAY key to start playback.
Adjust the connected monitor system, or the level
control for the PHONES on the unit to set the listen-
ing level you desire.
NOTE
If a disc has scratch or grime, it could cause the laser
pickup to “skip.” In this case, set the READ SPEED sub-
menu in the PLAY menu option to “High“ (see “Opera-
tion basics” on page 16). This may resolve the prob-
lem, however, the unit’s running sound may become
louder.
5. To stop playback, press the STOP key.
To temporarily stop playback and enter playback
standby mode, press the PAUSE key. To resume
playback, press the PL AY key again.
NOTE
To confirm the total playing time, use the PLAY TIME
option in the SYSTEM sub-menu (see “Operation
basics” on page 16)
Discs for playback
The CD discs in the CD-RW900MKII can play back the types of
discs listed below.
Commercial pre-recorded CDs recorded in CD-DA
format.
CD-R and CD-RW discs that have been recorded in
CD-DA format and finalized properly.
MP3 files recorded in ISO9660 level 1 and level 2
format on CD-R and CD-RW discs, and properly final-
ized. MP3 files that are recorded to a disc with Joliet
format extensions are also playable.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-RW900MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-RW900MKII in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info