617926
30
Zoom out
Zoom in
Previous page
1/44
Next page
30 TASCAM CD-GT2
IMPORTANT SAFETY PRECAUTIONS
Using guitars and mics
Use the following procedures to adjust the CD playback signal
and input signal levels independently to achieve the mix
balance that you desire.
1 Press the LEVEL key to open the LEVEL screen.
The GUITAR/MIC and CD knob icons appear. These adjust
the levels of the input signal from the GUITAR/MIC IN jack
and the CD playback signal.
2 Use the CURSOR (˙, ¥) keys to select the knob that
you want to adjust. The level value of the selected knob
appears as a pop-up in inverse.
3 Use the VALUE (+, –) keys to adjust the level. The level
knob icon rotates as you change the value.
Using built-in effects
This device has a built-in multi-effects processor.
Depending on the INPUT setting (GUITAR/MIC IN jack input
settings) on the LEVEL screen, either the guitar or mic effects
are usable. (See “Setting the input” on page 29.)
Press the EFFECT key to open the EFFECTOR screen.
On the EFFECTOR screen, use the CURSOR (§, ) keys to
select items and the VALUE (+, –) keys to adjust settings in the
same way as on other screens. Use the CURSOR (˙, ¥) keys
to move between level knobs and effect modules.
As shown in the gure above, in addition to BANK and
PRESET, the EFFECTOR screen also shows the LVL (level)
knob and icons for up to three guitar or microphone effect
modules. The guitar or microphone icon shows whether
the effects that can currently be used are for a guitar or mic
and have no settings, but all other icons contain adjustable
settings. The types of effect modules change depending on the
GUITAR /MIC IN jack input setting.
When you select the LVL knob or effect modules, a pop-up
appears for the setting items. Use the CURSOR (§, ) keys to
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-GT2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-GT2 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info