490774
34
Zoom out
Zoom in
Previous page
1/52
Next page
34 TASCAM CD-A550/CD-A750
5 – Playing Back CDs
The call point is erased after any of the following
operations.
The power is turned OFF
The disc tray is opened
The playback mode is changed
The folder playback function ON/OFF setting is
changed
The folder is changed
If you press the CALL key when no call point has
been set, “No Call Pt!” appears on the main display.
The call function cannot be used during random
playback mode.
Resume playback
Turn the resume playback function ON to allow playback
to restart from the position where playback was last stopped
(resume point).
When the resume playback function is ON, RESUME appears
on the display.
1 When in standard display mode, press the MENU
key on the main unit or the remote control to enter
menu mode.
2 Use the /+ keys on the main unit or the remote con-
trol to show “RESUME?” on the main display, and
press the ENTER key on the main unit or the remote
control.
3 Use the /+ keys on the main unit or the remote con-
trol to select “ON” or “OFF” (default value).
4 Press the ENTER key to return to the standard dis-
play.
The resume point ON/OFF setting is retained even if
the power is turned OFF.
The resume point is erased after any of the following
operations.
The disc tray is opened
The folder playback function ON/OFF setting is
changed
The folder is changed
The playback mode is changed
EOM function
Turn the EOM (End Of Message) function ON to have the
unit start blinking the playback time display when the audio
CD reaches the remaining playback time set in advance. In
addition, the CD-A750 model can send an EOM tally signal
with this information from its
CONTROL I/O PARALLEL
jack, and this tally signal can be used to light an external
lamp, for example. Use the menu to set the EOM function.
(See “Using the menu” on page 17 for details about how to
use the menu.)
1 When in standard display mode, press the MENU
key on the main unit or the remote control to enter
menu mode.
2 Use the –/+ keys on the main unit or the remote con-
trol to show “
EOM DISP?
” on the main display,
and press the ENTER key.
3 Use the /+ keys to choose one of the following set-
tings.
Options: OFF (default value), 5sec, 10sec, 15sec, 20sec,
25sec, 30sec, 35sec
All the settings except for “OFF” turn the EOM function
ON and indicate the number of seconds before the end
of the track when the unit’s playback time starts to blink
on the display.
4 Press the ENTER key to return to the standard dis-
play.
This setting is retained even if the power is turned OFF.
How to use the tally signal (CD-A750 only)
1 Following the procedures above, use the menu to
set the EOM DISPLAY item to any setting besides
“OFF.”
2 Connect this unit to the device that is to receive the
EOM tally signal using the CONTROL I/O PARALLEL
jack. See “Using the parallel connector” on page 45
for information about the PARALLEL jack pin alloca-
tion.
3 Turn the power of this unit and the receiving device
ON.
4 Start playback of the CD in this unit. During play-
back, when the set track remaining time is reached
the EOM tally signal is output from the CONTROL I/
O PARALLEL jack.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-A750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-A750 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info