Manual Tascam CD-A750 (page 28 of 52) (English)

490774

Zoom out

Zoom in

1/52

28 TASCAM CD-A550/CD-A750

5 – Playing Back CDs

In program input mode, the total program time and the

number of programmed tracks is shown on the display.

(However, the total program time is not shown for data

CDs.) When no tracks have been added to the program,

0:00/00

is shown.

Program input mode can be activated by selecting the

PROGRAM EDIT item from the menu. (See “Using the

menu” on page 17 for details about using the menu.)

2 Use the numeric keys or the SKIP Â/¯ keys to

select a track to add as program step 01.

When using the numeric keys, input the leftmost digit

first.

[Audio CD]

[Data CD]

When using a data CD, if you do not press the numeric

keys or the SKIP Â/¯ keys for a second, the display

switches from showing the track number to showing the

ﬁle name.

3 Press the ENTER key to add the selected track to the

program and return to program input mode, which

allows you to add the next program step.

4 Repeat steps 2 and 3 above to add as many tracks as

you desire in order.

5 When finished program setting, to exit program

input mode, press the ENTER key or the PROGRAM

EDIT key to return to the standard display.

Pause program

You can set the program to pause by entering “0” for a

track number using the numeric keys. During programmed

playback, when the program reaches a step set to pause, the

unit’s CD player pauses. You must press the

CD PLAY

key

to advance to the next program step.

The same track can be added to the program mul-

•

tiple times.

Press the remote control CLEAR key to remove the

•

last added track from the program.

Press the CD STOP key to remove all tracks from the

•

program.

The program can have a maximum of 99 tracks. If

•

you try to add more than 99 tracks, the “PGM Full!”

error message appears on the display.

If the total playback time of the programmed tracks

•

exceeds 999 minutes and 59 seconds “ –––: ––” is

shown on the display.

You cannot add a pause as the ﬁnal program step.

•

You cannot add a pause that would result in two

•

consecutive pauses.

In program input mode, use the –/+ keys to change

•

program steps and conﬁrm their contents.

Programmed playback mode and the program set-

•

tings are retained even if the power is turned OFF.

In programmed playback mode, playback is impos-

•

sible if no tracks have been added to the program.

Clearing the entire program

In addition to pressing the

CD STOP

key to clear the entire

program in program input mode, as described above, all the

following actions also clear the entire program.

Opening the disc tray

•

Turning the folder playback function ON or OFF

•

Changing the playback mode

•

Changing the folder

•

Checking the program

You can check the contents of the program.

1 Press the PROGRAM EDIT key on the remote control

to put the unit into program setting mode.

2 Press the –/+ keys to cycle through the program

steps shown on the display, starting at the first.

Pressing the – key cycles through the tracks in the

program in reverse order from the last added step.

Editing the program

You can edit a program that has already been created.

1 Press the remote control PROGRAM EDIT key to put

the unit into program input mode.

2 Use the –/+ keys to select the program step that you

want to edit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-A750 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tascam CD-A750 Manual

Product: