587261
13
Zoom out
Zoom in
Previous page
1/56
Next page
TASCAM CD-9010CF
13
2 – Names and Functions of Parts
Home Screen
The following information is shown on the display of the unit.
Home Screen with audio CD
Home Screen with data CD or CF card
Playback level meters
These show the playback level.
If you press the ST/MONO button to light the MONO
indicator, only one level bar will be shown and the indicator
on the left end will change from
LR
to
3M
,
6M
,
L
, or
R
,
depending to the
SYSTEM
menu
MONMIX
item setting. (See
"Mono mix setting" on page 43.)
Even when set to
ST
, if a mono WAV file is played back, the
display will change to
M
and a single level bar will be shown.
If you switch the
SYSTEM
menu
METER TYPE
item to
VU
from
PEAK
, the display will change to a VU-type meter display. (See
"Setting the level meter display type" on page 44.)
Index
This shows the currently playing or selected index number
(audio CD only).
Track time display (main area)
This shows the time of the current track.
The contents depend on the playback media.
Media Contents shown
Audio CD Minutes, seconds, frames
Data CD
Hours, minutes, seconds, frames
CF card
Pressing the TIME DISPLAY button switches between
elapsed time display and remaining time display.
A
-
appears before the remaining time when shown.
When an EOM tally signal is being output, the
:
blinks. (See
"EOM functions" on page 27)
Playback mode
Shows the current playback mode.
Indicator Meaning
CONTINUE
Continuous playback mode
SINGLE
Single playback mode
PROGRAM
Program playback mode
Track number
Shows the current track number.
Track playback position
Shows the current playback position as a bar. As playback
proceeds, the bar extends from the left.
Repeat playback function indicator
This shows the ON/OFF status of the repeat playback
function.
Indicator Meaning
No indicator Repeat playback function is OFF
REPEAT
Repeat playback function is ON
REPEAT A-
A-B repeat playback function starting
point set
REPEAT A-B
A-B repeat playback function is ON
NOTE
The A-B repeat playback function will only be displayed if
selected using a TASCAM RC-9010/RC-9010S remote controller
(sold separately).
PITCH indicator
The
PITCH ON
indicator appears if the pitch control function
is on.
Master clock indicator
This shows the current master clock.
Indicator Meaning
INT
Unit's internal clock in use
EXT
Synchronized with the word clock
input through the WORD SYNC IN
connector
EXT NO CLK
No signal input through the WORD
SYNC IN connector
EXT UNLOCK
WORD SYNC IN connector input
signal unlocked
EXT
(blinking)
Synchronization with word clock
input through the WORD SYNC IN
connector possible (after playback
completes, the unit will automatically
resynchronize with the word clock)
44.1K
Master clock frequency is 44.1 kHz
48K
Master clock frequency is 48 kHz
Information area
CD-TEXT will be shown if available.
File names will be shown when using data CDs and CF cards.
When the playback mode is set to
PROGRAM
, information for
the next program item is shown.
Track time display (sub area)
The time of the current track is shown. When the main
display area shows the elapsed time, this shows the
remaining time, and vice versa.
A
-
appears before the remaining time when shown.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-9010CF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-9010CF in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info