587259
26
Zoom out
Zoom in
Previous page
1/40
Next page
26 TASCAM CD-6010
6 – Various Playback Functions
Repeat playback
You can repeatedly play back all tracks or repeatedly
play back a specified region within a track (A-B repeat
playback).
Ordinary repeat playback
When the repeat playback function is on, behavior
depends on the playback mode.
All track playback (ordinary playback) mode: the entire
disc is played back repeatedly
Single track playback mode: the current track is played
back repeatedly
Program playback mode: all the tracks in the program
are played back repeatedly
Random playback mode: all the tracks on the disc are
played back at random repeatedly
Use one of the following procedures to turn the repeat
playback function on.
Using the front panel buttons:
When in shift mode (SHIFT indicator lit), press the PLAY
MODE [REPEAT] button.
REPEAT
appears of the top of
the display when repeat mode is activated. You can also
do this by pressing the PLAY MODE [REPEAT] button
while pressing and holding the SHIFT button.
Using the remote control:
Press the remote REPEAT button.
REPEAT
appears of
the top of the display when repeat mode is activated.
Use one of the following procedures to turn the repeat
playback function off.
When the player is in shift mode (
SHIFT indicator lit),
press the PLAY MODE [REPEAT] button again until
REPEAT
disappears from the top of the screen. You
can also do this by pressing the PLAY MODE [REPEAT]
button while pressing and holding the SHIFT button.
Press the
REPEAT button on the remote until
REPEAT
disappears from the top of the screen.
NOTE
The repeat playback setting is retained even when the power
is turned off.
A-B repeat playback
You can specify a desired interval (A-B) within a track to be
played back repeatedly. Use the following procedures to
enable A-B repeat playback.
1 During playback or when paused, when the player is
in shift mode (SHIFT indicator lit), press and hold the
PLAY MODE [REPEAT] button on the player, or press
and hold the PLAY MODE [REPEAT] button while
pressing the SHIFT button, or press and hold the
REPEAT button on the remote to activate A-B repeat
mode.
REPEAT
will blink at the top of the display.
2 Press the TRACK SKIP/DATA knob on the player or
the REPEAT button on the remote at the beginning
of the interval that you want to repeat (A point).
A-B
will blink at the top of the display.
3 Once again, press the TRACK SKIP/DATA knob on the
player or the REPEAT button on the remote at the
end of the interval that you want to repeat (B point).
Repeat playback between the A and B points will
begin, and
A-B
will stop blinking and continue to
appear at the top of the display.
4 To end A-B repeat playback, press the ª STOP [INTRO
CHECK] button on the player or the ª STOP button
on the remote.
NOTE
A-B repeat playback cannot be used with a data CD.
Once playback reaches the B point, playback will restart
from the A point.
A-B repeat playback across more than one track is not
possible.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-6010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-6010 in the language / languages: English as an attachment in your email.

The manual is 4,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info