587259
16
Zoom out
Zoom in
Previous page
1/40
Next page
16 TASCAM CD-6010
3 – Preparation
Making connections
The illustration below shows an example of connecting other equipment with a CD-6010.
Precautions before making connections
Before connecting other devices to the unit, read their manuals carefully.
Turn off the power (or put power into standby mode) for this unit and all equipment that will be connected to it.
Connect all the devices to the same power supply line. When using a power strip, for example, use a thick cable with a
high current capacity to minimize variation in the power voltage.
TASCAM RC-3F
Footswitch
(sold separately)
TASCAM RC-20
Direct Play Remote
(sold separately)
Headphones
External controller
Computer
USB
DIGITAL
IN
(COAXIAL)
Digital inputs of mixers,
recorders, ampliers, etc.
ANALOG
IN
(UNBALANCED)
Analog inputs of mixers,
recorders, ampliers, etc.
ANALOG IN
(BALANCED)
DIGITAL IN
(AES/EBU)
Connecting a footswitch
Connect a TASCAM RC-3F footswitch (sold separately) to
the REMOTE connector to enable it to control some unit
operations. (See “Controlling the player with a footswitch
on page 33.)
Connecting a direct play remote
Connect a TASCAM RC-20 direct play remote (sold
separately) to the REMOTE connector to enable it to
control some unit operations. (See “Controlling the player
with a direct play remote on page 34.)
Connecting headphones
Connect stereo headphones to the PHONES jack on the
front panel. Use the LEVEL knob to adjust the volume.
CAUTION
Before connecting headphones, turn the LEVEL knob to
minimize the volume. Failure to do so might cause sudden
loud noises, which could harm your hearing or result in other
trouble.
Connecting with a computer
Connect the RS-232C connector on this unit to a RS-232C
connector on a computer to allow serial control of this
unit from that computer.
After connecting the unit to a computer, make
transmission settings correctly on this unit. (See “Using
the RS-232C connector on page 34.)
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-6010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-6010 in the language / languages: English as an attachment in your email.

The manual is 4,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info