Manual Tascam CD-6010 (page 10 of 40) (English)

587259

Zoom out

Zoom in

1/40

10 TASCAM CD-6010

2 – Names and Functions of Parts

Front panel

1 POWER switch

Press to turn the power on and off.

CAUTION

Before turning the power on, minimize the volume of other

equipment that is connected to this unit. Failure to do so

might cause sudden loud noises, which could harm your

hearing or result in other trouble.

2 Disc tray

Press the OPEN/CLOSE button to open the disc tray

when you want to load or remove a disc.

To close the disc tray, press the OPEN/CLOSE button

again.

3 OPEN/CLOSE button

Press to open and close the disc tray.

4 SHIFT button and indicator

Press this button to activate shift mode. When the

shift mode is active, the indicator lights and the shift

functions of other buttons are enabled. (Shift functions

are shown below buttons with white lettering on a

dark blue background.) After pressing one of these

buttons, shift mode is automatically ended and the

indicator becomes unlit.

NOTE

When in shift mode, press the SHIFT button again to end

•

shift mode (and turn off the indicator). After searching

folders/directories, if the SHIFT indicator is lit, press the

SHIFT button to end shift mode.

You can also press a button with a shift function while

•

pressing and holding the SHIFT button to use its shift

function.

5DISPLAY [LOCK] button

Press this button when the playback time is shown to

switch the playback time display mode (track elapsed

time, track remaining time or total remaining time).

(See “Changing the playback time display mode” on

page 32.)

When in menu mode, press this button to exit menu

mode.

To turn the panel lock function on and off, press and

hold this button when in shift mode (when the SHIFT

indicator is lit) or while pressing the SHIFT button.

This function prevents the use of the buttons to avoid

misoperation.

6 Display

Shows various types of information.

7 TRACK SKIP/DATA [INDEX/DIR SEARCH] knob

This is a multifunction knob that works as both a dial

and a button. Use this knob to select (skip) tracks,

select indexes, select directories, set the pitch control

value, use menus, set the A-B repeat interval and as a

jog dial, for example.

To select an index, turn this knob when in shift mode

(when the SHIFT indicator is lit) or while pressing the

SHIFT button. When working with a data CD, use this

function to select a directory. What happens after

selection depends on the auto cue function setting.

(See "Skipping to the next or previous track" on page

22.)

When in program setting mode, use this function to

select tracks.

When in menu mode, turn this knob to select items

and press it to confirm a selection. (See “Menu

operation basics” on page 19.)

When in pitch adjustment mode, turn this knob to

adjust the pitch value. (See "Pitch control playback" on

page 27.)

When in jog mode, use this knob as a jog dial to search

one frame at a time. (See “Using the jog function to

search” on page 23.)

When using the A-B repeat function, press this knob

to set the A and B points. (See “A-B repeat playback” on

page 26.)

8JOG [PITCH] button

Press this button to start jog mode. (See "Using the jog

function to search" on page 23.)

To turn the pitch function ON/OFF, press this button

when in shift mode (when the SHIFT indicator is lit) or

while pressing the SHIFT button. (See "Pitch control

playback" on page 27.)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-6010 in the language / languages: English as an attachment in your email.

The manual is 4,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tascam CD-6010 Manual

Product: