587258
30
Zoom out
Zoom in
Previous page
1/40
Next page
30 TASCAM CD-500/500B
3 While the beginnings of the tracks are being
loaded into memory, the word
FLASH
blinks on
the display. After loading completes,
FLASH 01-
10
appears on the display and the Á PLAY indicator
blinks.
4 Press the number button for the program number
(when program set) or track number (when
program not set) that you want to play.
To select numbers between 11 and 20, press the
CLEAR [1-10/11-20] button, so that
FLASH 11-
20
appears on the display, and then press the
corresponding number button. Press the CLEAR [1-
10/11-20] button again to return to
FLASH 1-10
.
Using the remote control:
1 Prepare the program as necessary.
2 Press the FLASH button.
3 While the beginnings of the tracks are being
loaded into memory, the word
FLASH
blinks on
the display. After loading completes,
FLASH 01-
10
appears on the display and the Á PLAY indicator
blinks.
4 Press the number button for the program number
(when program set) or track number (when
program not set) that you want to play.
To select numbers between 11 and 20, press the
CLEAR [1-10/11-20] button, so that
FLASH 11-
20
appears on the display, and then press the
corresponding number button. Press the CLEAR [1-
10/11-20] button again to return to
FLASH 1-10
.
ª
Exiting flash start mode
Using the front panel buttons:
When in shift mode (SHIFT indicator lit), press the 1
[FLASH] number button to exit flash start mode.
Using the remote control:
Press the FLASH button to exit flash start mode.
Relay playback
Multiple CD-500 and CD-500B units can be used together
and set so that when playback ends on one unit, playback
can automatically start on another unit.
To do this, connect the CONTROL I/O START (RELAY IN)
connector on the rear panel of the CD-500/CD-500B to
the CONTROL I/O DISC EOM (RELAY OUT) on another
CD-500/CD-500B with a cable and enable relay playback
mode on both units.
To enable relay playback mode, set the
06 RELAY
menu item to
ON
.
By connecting two CD-500/CD-500B units in both
directions as shown in illustration below, alternating
playback between them is possible.
By connecting three or more CD-500/CD-500B units in
sequence (CONTROL I/O START (RELAY IN) to CONTROL
I/O DISC EOM (RELAY OUT)) as shown below, automatic
playback of one unit after the other is possible.
NOTE
The relay playback function on/off setting is retained even
when the power is turned off.
6 – Various Playback Functions
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-500B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-500B in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info