587258
12
Zoom out
Zoom in
Previous page
1/40
Next page
12 TASCAM CD-500/500B
2 – Names and Functions of Parts
Rear panel
CD-500 rear panel
CD-500B rear panel
o CONTROL I/O START (RELAY IN) and DISC EOM
(RELAY OUT) jacks (3.5-mm mini-jacks)
Use these jacks for fader start and event start, as well
as for relay playback of multiple CD-500 and CD-500B
units. (See “Relay playback” on page 30 and “Fader and
event start on page 32.)
p CONTROL I/O RS-232C connector
This is a D-sub 9-pin RS-232C serial control connector.
Connect an external controller, for example, here. (See
“Using the RS-232C connector on page 33.)
a DIGITAL OUT (OPTICAL) connector
The digital CD playback signal is output in S/PDIF
format.
s DIGITAL OUT (COAXIAL) connector
The digital CD playback signal is output in S/PDIF
format.
NOTE
When playing back MP3 or WAV files, the sampling
frequency of this units digital outputs is 44.1 kHz.
When using the pitch control function while playing
an audio CD or another disc with MP3 or WAV files, the
digital output is at a fixed sampling frequency of 44.1
kHz.
d ANALOG OUT (UNBALANCED) jacks
These are analog outputs for the CD playback signal.
The maximum output level is +6 dBV.
f ANALOG OUT (BALANCED) connectors (CD-500B
only)
These are balanced analog outputs for the CD
playback signal. The maximum output level is +20 dBu.
(1: GND, 2: HOT, 3: COLD)
g DIGITAL OUT (AES/EBU) connector (CD-500B only)
This is a balanced digital audio XLR connector that
outputs AES3-2003/IEC 60958-4 (AES/EBU) format.
NOTE
If the signal is not output from this connector correctly,
confirm that the “22 U-DATA menu item is set to “OFF”. (See
“User data settings on page 34.)
h CONTROL I/O PARALLEL connector (CD-500B only)
This is a D-sub 15-pin parallel control connector. Use
this to connect an external controller, for example. (See
“Fader start and stop” on page 32 and “Using parallel
control” on page 34.)
j AC IN connector
Connect the included power cord here.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-500B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-500B in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info