587256
47
Zoom out
Zoom in
Previous page
1/52
Next page
e You cannot adjust the unit volume using an iPod/
iPhone.
Internet radio
Cannot connect to the Internet.
e Confirm that a computer can connect to the Internet
using the same network.
e Enter a correct network connection password.
e Check the settings of the network’s firewall.
e The station/podcast might not be available at the
moment.
e The link for the station/podcast might be out of date.
e The number of registered users for the station/pod-
cast might have already reached a limit, making it
unavailable to the public.
e If the Internet connection speed is too slow, searching
might take time.
Cannot listen to an Internet radio station or podcast.
e The broadcaster might have a temporary problem
with their Internet connection.
e Confirm that your system is properly connected to the
Internet.
DLNA
Cannot connect to the network.
e Check the settings of the network’s firewall.
e Confirm that a DLNA server on the same network can
connect to the network.
e Confirm that the password to connect to the DLNA
server is correct.
e Confirm that the DLNA server is not shut down or in
sleep mode.
e There might be a problem with the network authenti-
cation. Press the SOURCE button to select NET again.
Cannot find a track.
e Add the track to the media library of Windows Media
Player.
e Select this unit from the Windows device list.
e If the computer is using antivirus or security software,
the unit might not be able to connect to it.
Home Media
Cannot find a folder/file.
e Make folder/file sharing settings.
e Add the file to the shared folder.
e Confirm that the password for the user account is
correct.
e Check the file format.
e If the computer is using antivirus or security software,
the unit might not be able to connect to it.
This unit uses a microprocessor, so noise and other
external interference could cause it to stop function-
ing properly. If this should occur, unplug the unit’s
power from the outlet and wait a little while before
plugging the power in again and retrying the
operation.
If the unit still does not function properly after doing the
above, follow the procedures in “Restoring factory default
settings” on page 47 to restore the unit to its factory
default settings and try the operation again.
Restoring factory default settings
If this unit does not operate properly, follow the proce-
dures below to restore it to the default settings that it had
when shipped new from the factory. Doing this might cor-
rect the problem.
While the unit is on, press and hold the stop (8) but-
ton and press the STANDBY/ON button.
Note about condensation
If this unit is brought from a cold outdoor environment
into a warm room, or the heater has just been turned
on in the room where it is located, for example, con-
densation might occur on operating parts or lenses,
resulting in improper operation. If this occurs, leave the
unit on and wait 1-2 hours. This should enable normal
playback.
4747
ENGLISH
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-240 in the language / languages: English as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info