587254
39
Zoom out
Zoom in
Previous page
1/48
Next page
TASCAM CD-200SB
39
7 – Dubbing (copying)
Dubbing
1. Load the dubbing source CD.
If the dubbing source CD is a data CD, press the main unit
or remote MEDIA SELECT button to set the dubbing source
media to CD. (See “Selecting the playback media on page
19.)
Set the playback area to
ALL PLAY
or
FOLDER
as necessary.
If set to
FOLDER
, use the main unit or remote FOLDER g/
t buttons to select the folder that you want to dub. (See “5
– Browsing on page 30.)
NOTE
When dubbing an audio CD, setting the playback area is not
necessary.
2. Press the MEDIA SELECT button on the main unit or the
remote to select the dubbing destination media (SD card or
USB flash drive).
-SD-
or
-USB-
will appear on the display.
NOTE
If only one type of media—an SD card or a USB flash drive—
is loaded, that media will be the dubbing destination
regardless of the current media setting made using the
MEDIA SELECT button on the main unit or the remote.
If both an SD card and a USB flash drive are loaded and the
media selected using the MEDIA SELECT button on the
main unit or the remote is either SD card or CD, the CD will
be dubbed to the SD card. If the media selected is the USB
flash drive, the CD will be dubbed to the USB flash drive.
3. Press the main unit DUBBING [WAV/MP3] button while
pressing and holding the DISPLAY [SHIFT] button or press
the remote WAV/MP3 button to set the file format used
when writing to the dubbing destination.
Cycle through dubbing destination file formats
Dubbing file format settings
Display File format
DUB WAV
44.1kHz 16-bit stereo WAV
DUBMP3HQ
(default value) 44.1kHz 256kbps stereo MP3
DUBMP3MQ
44.1kHz 128kbps stereo MP3
DUBMP3LQ
44.1kHz 64kbps stereo MP3
When the current format setting is shown, press the main
unit DUBBING [WAV/MP3] button while pressing and
holding the DISPLAY [SHIFT] button or the remote WAV/
MP3 button again to cycle through the setting options.
NOTE
The dubbing destination file format setting is retained even
when the power is turned OFF.
4. Press the main unit DUBBING [WAV/MP3] button or the
remote DUBBING button.
WAIT
appears on the display as the unit begins checking the
dubbing destination media.
5. After the dubbing destination media has been success-
fully confirmed,
SEL FLDR
appears on the display and the
FOLDER/TRACK SELECT (1–10/0) button indicators blink or
light.
Blinking indicators show that no direct folder has been
assigned to that button. Lit indicators show that a folder has
been assigned.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-200SB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-200SB in the language / languages: English as an attachment in your email.

The manual is 9,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info