587254
28
Zoom out
Zoom in
Previous page
1/48
Next page
28
TASCAM CD-200SB
4 – Playback
NOTE
After pressing the DISPLAY [SHIFT] button on the main unit
or the DISPLAY button on the remote control, the currently
selected type of information to be shown on the main
display appears for two seconds as follows.
Track elapsed time:
ELAPSED
Track remaining time:
REMAIN
Total remaining time:
T REMAIN
Album/track title:
TITLE
Album/track artist:
ARTIST
File name:
FILENAME
The text information that can be shown on the display is CD
text information for audio CDs, ID3 tag information for data
CDs and ID3, WMA and AAC tag information for SD cards
and USB flash drives.
When information is not included for a disc or file,
NO
TITLE
(title information) or
NO NAME
(artist information)
is shown. If the information contains characters that cannot
be displayed, those characters are replaced by
_
.
When an audio CD is in programmed playback mode the
elapsed time and remaining time of the entire program is
shown.
The display contents setting is retained even when the
power is turned off.
The number of songs and track numbers within a folder
might not match on SD cards and USB flash drives that have
been written on by a Mac. This is an existing problem with
Mac system files, but it will not affect playback on this unit.
Pitch control (with CDs only)
Using pitch control playback, CDs can be played back at a
different pitch (sound frequency and playback speed).
Follow the procedures below to use pitch control playback.
1. Press the REPEAT [PITCH] button while pressing and
holding the DISPLAY [SHIFT] button on the main unit or
press the PITCH button on the remote control to turn pitch
control ON. The current pitch control value is shown at this
time.
2. Use the FOLDER g/t [PITCH −/+, / ] buttons on the
main unit or the PITCH –/+ button on the remote control to
set the pitch in 0.5% units in a range of ±14.0%.
o To turn pitch control playback OFF:
Press the REPEAT [PITCH] button while pressing and
holding the DISPLAY [SHIFT] button on the main unit or
press the PITCH button on the remote control.
NOTE
During playback, turning pitch control playback ON or OFF
might cause the playback sound to skip momentarily.
Using pitch control playback with a data CD (MP3, WAV)
sometimes causes the playback sound to skip.
Digital output is possible when the pitch control function is
ON during playback of MP3 and WAV files on audio CDs, but
the sampling frequency is changed by an amount propor-
tional to the pitch control value. When pitch control is ON,
therefore, some equipment might not be able to receive the
digital output signal from the CD-200SB.
The pitch control function cannot be used with SD cards and
USB flash drives.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-200SB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-200SB in the language / languages: English as an attachment in your email.

The manual is 9,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info