587254
10
Zoom out
Zoom in
Previous page
1/48
Next page
10
TASCAM CD-200SB
2 – Names and functions of parts
Top panel
1 POWER switch
Press this switch to turn the unit on or off.
NOTE
Before turning this unit’s power ON/OFF, minimize the
volume of monitoring systems connected to it.
Do not wear headphones when turning the power ON/OFF.
Noise could damage speakers or your hearing.
2 FOLDER/TRACK SELECT (1–10/0) buttons/indicators
When the TRK SEL indicator is not lit, these buttons can be
used for the direct folder function.
The indicators light on the buttons that have folders
assigned for the direct folder function. (See “Assigning direct
folders on page 32.)
Press a button that has a lit indicator to begin playback of
the folder that has been assigned using the direct folder
function. During folder playback, the indicator blinks. (See
“Direct folder playback” on page 35.)
When the TRK SEL indicator is lit, these buttons can be used
as number (1–10/0) buttons to select track numbers on the
current media. (See “Selecting by track number” on page
23.)
Track numbers have a maximum of two digits on audio CDs
and a maximum of three digits on data CDs, SD cards and
USB flash drives.
3 SET [AUTO SET] button/indicator
Use with the direct folder function to assign folders on an SD
card or USB flash drive to FOLDER/TRACK SELECT (1–10/0)
buttons. This indicator lights during assignment. (See
Assigning direct folders” on page 32.)
Press this button while pressing and holding the DISPLAY
[SHIFT] button to automatically assign folders on the SD
card/USB flash drive to the FOLDER/TRACK SELECT (1–10/0)
buttons that have not yet been assigned. This indicator
blinks when the direct folder AUTO SET function is in use. (See
Automatically assign all direct folders (AUTO SET)” on page
33.)
4 CLEAR [CLEAR ALL] button/indicator
Use with the direct folder function to clear FOLDER/TRACK
SELECT (1–10/0) button folder assignments. This indicator
lights while clearing an assignment. (See “Clearing individual
direct folder assignments on page 36.)
Press this button while pressing and holding the DISPLAY
[SHIFT] button to clear all FOLDER/TRACK SELECT (1–10/0)
buttons folder assignments. This indicator blinks while
clearing all assignments. (See “Clearing all direct folder
assignments (CLEAR ALL)” on page 37.)
5 DUBBING [WAV/MP3] button/indicator
Use when dubbing (copying) from a CD to an SD card or
USB flash drive. This indicator lights while dubbing. (See “7
Dubbing (copying)” on page 38.)
Press this button while pressing and holding the DISPLAY
[SHIFT] button to show the current recording format setting
used when dubbing for two seconds. Press this button again
while pressing and holding the DISPLAY [SHIFT] button
during this time to change the setting. (See “Dubbing on
page 39.)
6 Disc tray
Insert discs (CD, CD-R, CD-RW) here.
7 OPEN/CLOSE button
Use to open and close the disc tray.
8 PLAY/PAUSE button
Press during playback to pause. When playback is stopped or
paused, press to start playback.
When in browse mode, use to confirm the selected track and
to start playback.
9 STOP button
Press to stop playback.
While editing a program, press to clear all the program
entries. (See “Setting the program” on page 25.)
0 SEARCH m/,[.//, SELECT 5/b]buttons
When in browse mode, use these to change the selection.
(See “5 – Browsing on page 30.)
q PHONES jack and knob
Use this standard stereo jack to connect stereo headphones.
Use a plug adapter when connecting headphones with
mini-plugs. Use the PHONES knob to adjust the headphone
output level.
CAUTION
Use the PHONES knob to minimize the volume before connecting
headphones. Failure to do so could cause a sudden burst of loud
noise, which might result in hearing damage, for example.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-200SB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-200SB in the language / languages: English as an attachment in your email.

The manual is 9,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info