587251
31
Zoom out
Zoom in
Previous page
1/36
Next page
TASCAM CD-200i
31
By connecting an iPod with the iPod dock on the front
panel, this unit can control the iPod and output its sound/
video. Moreover, it can also recharge the iPod when this
unit’s power is ON.
iPod dock
Connect an iPod following the instructions on page 16.
Always attach a dock adapter suitable for your iPod to
the connector. Dock adapters are not included with this
product. Use the dock adapter included with your iPod or a
commercially available Apple iPod Universal Dock Adapter
made by Apple Inc.
Read the instructions on page 16 carefully and proceed
with caution in order to avoid damage to the connectors
and sudden bursts of noise when connecting and discon-
necting an iPod.
See our website (http: //www.tascam.com/) for informa-
tion about compatible devices.
Controlling an iPod
The following keys on the CD-200i front panel and remote
control (RC-CD200i) can be used to control the iPod.
PL AY/READY key (¥/π): Play/Pause
STOP key (
ª
): Pause
SKIP keys (
Ô
/
Â
,
¯
/
): Previous and Next
(press and hold for Rewind and Fast-forward)
FOLDER keys (
˙/¥
): Skip through albums
REPE AT key: Cycle through repeat single track, repeat all
tracks and repeat off modes
PLAY MODE key: Cycle through continuous, song shuffle
and album shuffle playback modes
DISPL AY key: Sets whether the iPod video is shown on the
iPod itself or output from this unit’s VIDEO OUT jack
CAUTION
Depending on the iPod software version, operation
from the CD-200i might not work.
Settings made on the iPod
Make the following settings on the iPod in order to output
video. These settings cannot be made from the CD-200i.
TV Signal setting (NTSC or PAL)
TV Screen (or Widescreen) setting
iPod playback
1. Press the PLAY MODE/INTRO CHECK (SOURCE
SEL) while pressing and holding DISPLAY (SHIFT)
key at the same time, or press the SOURCE SEL on
the remote control, and set the output sound source
to iPod.
PLAY MODE/INTRO CHECK
(SOURCE SEL) key
SOURCE SEL key
Doing this makes it possible to control the iPod from the
CD-200i front panel and remote control (RC-CD200), as
well as to output the iPod’s sound and video signals.
Setting the iPod video output
When iPod is selected, you can use the DISPLAY key on the
main unit or the remote control to switch whether its video
is shown on the iPod itself or output through this unit’s
VIDEO OUT jack.
You cannot, however, switch the video output destination
during video playback. Switch it while the iPod is stopped
or stop the playback once and then switch it if the iPod is
already playing back.
If switched during video playback, the new output
destination is used when playback is stopped then started
again.
[Video Out: iPod]
[Video Out: CD-200i VIDEO OUT]
When VIDEO ON is selected, the iPod video signal is
always transmitted from this unit’s video outputs,
regardless of the selected (audio) output source.
When playing the video clip by iPod Touch, pressing
the DISPLAY key stops the video playback.
5 − iPod Playback
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-200i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-200i in the language / languages: English as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info