587253
11
Zoom out
Zoom in
Previous page
1/32
Next page
TASCAM CD-200BT 11
2 – Names and functions of parts
e PLAY MODE/PLAY AREA [SOURCE SEL] button
Press briefly to change the playback mode.
The four playback modes are continuous, single, random
and program. (See “Playback modes” on page 18.)
Press and hold this button to select ALL PLAY or FOLDER
as the play area during data CD playback. (See “Setting the
playback area on page 18.)
Press this button while pressing and holding the DISPLAY
[SHIFT] button to cycle through the current source options
in the following order.
Current source order
NOTE
AUX IN cannot be selected if nothing is connected to the
AUX IN jack.
CAUTION
The playback mode and playback area settings can be
changed when the current source is Bluetooth, but these
settings have no effect on Bluetooth playback.
r REPEAT/INTRO CHECK [PITCH] button
Press to turn the repeat playback function ON/OFF. (See
“Repeat playback” on page 22.)
Press and hold this button during playback or when stopped
to use the intro check playback function. The first 10 seconds
of each track on the CD will be played back one after the
other. During intro check playback, press and hold this
button again to return to the previously active playback
mode and continue playing back the current track. (See “Intro
Check function” on page 24.)
While pressing and holding the DISPLAY [SHIFT] button,
press this button to turn the CD playback pitch control
function ON/OFF. (See “Pitch control” on page 24.)
CAUTION
The repeat setting can be changed when the current source
is Bluetooth, but this setting has no effect on Bluetooth
playback. Moreover, when using Bluetooth the intro check
function cannot be used.
t FOLDER g/t [PITCH −/+] buttons
Use these buttons when the current source is a CD and the
playback area is FOLDER to change the playback folder. (See
“Setting the playback folder” on page 20.)
Use these buttons when the current source is a CD and the
playback area is ALL PLAY to skip between folders.
Press this button while pressing and holding the DISPLAY
[SHIFT] button to set the pitch control value. (See “Pitch
control” on page 24.)
Rear panel
y ANALOG OUTPUT (UNBALANCED) jacks
These jacks output analog signals (Standard output: –10
dBV) of the CD or Bluetooth playback signal or the signal
input through the AUX IN jack.
u DIGITAL OUTPUTS (COAXIAL) jack
This jack outputs the CD playback signal in S/PDIF digital
format.
i DIGITAL OUTPUTS (OPTICAL) jack
This jack outputs the CD playback signal in S/PDIF digital
format.
NOTE
Audio from Bluetooth playback and audio input through
the AUX IN jack can only be output as analog signals. These
audio sources cannot be output as digital signals.
The sampling frequency of this unit’s digital output is always
44.1 kHz regardless of the playback file sampling frequency.
Digital output is possible when the pitch control function is
on with CD, but the sampling frequency is changed by an
amount proportional to the pitch control value.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-200BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-200BT in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info