592591

Tascam 202MKVI Manual

22
Zoom out
Zoom in
Previous page
1/28
Next page
22
Timer-Controlled Playback and Recording
Timer-Controlled Playback
1. Connect this unit and stereo system to a commercially
available audio timer.
2. Set the power switch of all components to ON.
3. Load a prerecorded cassette tape in TAPE 1 or 2.
You can also insert tapes into both decks. In this case, TAPE
1 starts first.
4. Set the REV MODE switch to the required position.
If you set the REV MODE switch to 7:
a tape deck plays only Side “A” of the tape.
o If a tape is in both the TAPE 1 and TAPE 2 compartments, the TAPE 1
deck plays Side “A” of the tape and then stops.
If a tape is in the TAPE 2 compartment only, the TAPE 2 deck
plays Side “A” of the tape.
If you set the REV MODE switch to j:
a tape deck continuously plays both sides of the tape.
When the tape deck reaches the end of Side “A” in playback mode,
it automatically reverses the tape and continues to play Side “B”.
o If a tape is in both the TAPE 1 and TAPE 2 compartments, the TAPE 1
deck plays both sides of the tape and then stops.
If a tape is in the TAPE 2 compartment only, the TAPE 2 deck
plays both sides of the tape.
If you set the REV MODE switch to p:
both sides of a tape are continuously played for up to five times.
5. Set the TIMER switch to the PLAY position.
6. Set the audio timer to the required start (power on) and
stop (power off) times. When this setting is completed, the
power to all components will be switched off.
When a preset start time is reached, power will be supplied and
playback will start automatically.
Playback always starts from side “A”.
NOTE
o If you directly connect the deck’s AC power cord to the AC outlet,
playback automatically starts by simply pressing on the POWER
switch of this deck when you set the TIMER switch to the PLAY
position. When you do not use the timer, set the TIMER switch to
the OFF position.
Timer-controlled recording
(Example: Recording a broadcast program)
1. Connect this unit and stereo system to a commercially
available audio timer.
2. Set the power switch of all components to ON.
3. Load a recordable cassette tape(s) in TAPE 1 or 2 (or both
decks for continuous recording).
4. Set the REV MODE switch to the required position.
If you set the REV MODE switch to 7:
a tape deck records on only Side “A” of the tape.
o If a tape is in both the TAPE 1 and TAPE 2 compartments, the
TAPE 1 deck records on Side “A” of the tape and then stops.
If a tape is in the TAPE 2 compartment only, the TAPE 2 deck
records on Side “A” of the tape.
If you set the REV MODE switch to j:
a tape deck continuously records on both sides of the tape.
When the tape deck reaches the end of Side “A” in record mode,
it automatically reverses the tape and continues to record on Side
“B”.
o If a tape is in both the TAPE 1 and TAPE 2 compartments, the
TAPE 1 deck records on both sides of the tape and then stops.
If a tape is in the TAPE 2 compartment only, the TAPE 2 deck
records on both sides of the tape.
If you set the REV MODE switch to p (continuous recording):
insert a tape into both the TAPE 1 and TAPE 2 compartments. The
TAPE 1 and TAPE 2 decks continuously record on the tapes.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam 202MKVI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam 202MKVI in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info